1g Dynamics vibration and climatic test facility
1g Dynamics
1g Dynamics describes an independent product test house for vibration and environmental testing. Its current pages publish aerospace, automotive, rail and motorsport applications, a 1700-litre temperature-and-humidity chamber that can integrate with shaker systems, and a high-heat static oven.
Reviewed by Arc · About this review
Key facts
- Published test-house scope
- The current test-facility page says 1g Dynamics accommodates vibration and environmental testing, with routine-test equipment and specialist systems for more demanding projects.
- Published application sectors
- 1g Dynamics says it conducts independent, confidential tests for aerospace, automotive, rail and motorsport applications to national and international standards.
- Climatic-test equipment
- The climatic-facility page publishes a 1700-litre chamber with temperature and humidity capability and a separate 216-litre high-heat static oven.
Testing capabilities
Vibration and environmental testing
The operator describes vibration and environmental testing, including work for aerospace, automotive, rail and motorsport applications against IEC, BS EN, Def Stan, Mil Std, STANAG and RTCA / EUROCAE standards.
Climatic testing
The operator publishes temperature-and-humidity chamber capability, integration of the 1700-litre chamber with shaker systems, and a separate controlled high-heat environment.
Equipment and published limits
| Specification | Published value | Conditions |
|---|---|---|
| 1700-litre climatic chamber | Internal dimensions 1300 × 1300 × 1000 mm; −70°C to +180°C; 5°C/min thermal rate of change; 10% RH to 98% RH | These are figures published together on the operator page. Confirm the usable combined temperature, humidity, payload and shaker-integration envelope for a particular test. |
| High-heat static oven | 216 litres; internal dimensions 600 × 600 × 600 mm; 25°C to +300°C; PID temperature controller | These are the operator’s published figures for the separate static oven. Confirm payload, uniformity and programme-specific conditions directly. |
Access and contact
The current pages invite prospective users to contact the expert team to discuss requirements and provide a contact form and +44 (0)1763 262300. They do not publish current capacity, lead times, pricing or item acceptance.
Facility contact
- Telephone
- +44 (0)1763 262300
- Website
- Official test house website
Standards and accreditation
- Published accreditation and standards wording
- The operator states that its Test House facility is accredited to UKAS 17025:2017 and cites IEC, BS EN, Def Stan, Mil Std, STANAG and RTCA / EUROCAE for environmental testing. Confirm whether a requested method is within the current accredited scope.
What to confirm with the facility
- Confirm the physical test location, applicable accreditation scope, combined equipment envelope, fixture needs, monitoring, item acceptance and availability before planning a test.
Before requesting a test
Public information not available. Contact test facility provider for more information.
Frequently asked questions
Public information not available. Contact test facility provider for more information.
Related testing facilities
Public information not available. Contact test facility provider for more information.
Further reading
Public information not available. Contact test facility provider for more information.
Sources and review
Arc reviewed the linked 1g Dynamics facility and contact pages on 30 September 2026. This is a review of published information, not a facility inspection or confirmation of availability. The footer’s Unit 10 address is labelled as a registered office, so this guide does not treat it as the physical test-site address.
Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.
Current first-party page used for the test-house identity, vibration and environmental testing description, sector examples, published standards wording and contact invitation. It does not establish the physical test-site address or current availability for a particular programme.
Current first-party page used for the published 1700-litre chamber and high-heat static-oven specifications. It does not establish a guaranteed combined envelope or current booking availability.
Current first-party contact page used for the enquiry form and published telephone number. Its footer labels Unit 10 as the registered office, so that address is not presented as the physical test-site address.