Aerotech Laboratories Coventry testing locations
Aerotech LaboratoriesCoventry, West Midlands
Aerotech Laboratories has three Coventry locations in UKAS schedule 1993: Unit 20 for chemical analysis, Unit 11 for salt-spray testing and Unit 17 for fluorescent-penetrant-consumables testing.
Reviewed by Arc · About this review
Key facts
- Three-location scope
- The schedule assigns chemical analysis to Unit 20, salt-spray testing to Unit 11 and fluorescent penetrant testing to Unit 17; it does not present all activities as one physical laboratory.
Testing capabilities
Salt-spray corrosion testing
At location B, Unit 11, the schedule lists neutral salt-spray testing for ferrous and non-ferrous metals and protective coatings.
NDT consumables conformance testing
At location C, Unit 17, the schedule lists tests for fluorescent penetrant consumables, including brightness, removability, water content and sensitivity.
Equipment and published limits
| Specification | Published value | Conditions |
|---|---|---|
| Largest listed salt-spray working size | 1,465 mm × 1,040 mm × 720 mm | UKAS lists three cabinets and this largest working size for the neutral salt-spray entry at location B. |
Access and contact
The schedule lists +44 (0)24 7647 4474 and support@aerotechlabs.co.uk for all three locations. Confirm the applicable location, method, sample fit and availability.
Facility contact
- Address
- Coventry, West Midlands
United Kingdom - Telephone
- +44 (0)24 7647 4474
- Website
- Official test house website
Standards and accreditation
- ISO/IEC 17025:2017 accreditation
- UKAS schedule 1993 states ISO/IEC 17025:2017 accreditation for its detailed scope at location codes A, B and C.
What to confirm with the facility
- Confirm which Coventry location handles the requested work, the exact method and revision, sample preparation and fit, reporting, capacity and turnaround.
Before requesting a test
Public information not available. Contact test facility provider for more information.
Frequently asked questions
Public information not available. Contact test facility provider for more information.
Related testing facilities
Public information not available. Contact test facility provider for more information.
Further reading
Public information not available. Contact test facility provider for more information.
Sources and review
Arc reviewed UKAS schedule 1993 on 30 September 2026. The guide treats Aerotech’s Coventry operation as a three-location scope and does not imply that NDT consumables and salt-spray testing occur at Unit 20.
Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.
Schedule of Accreditation 1993: Aerotech Laboratories
Issue 031, dated 19 February 2026, separates chemical analysis at Unit 20, salt-spray testing at Unit 11 and fluorescent-penetrant-consumables testing at Unit 17 in Coventry. The guide preserves this location split.