Albacom Vibration and Environmental Testing Facility
AlbacomDundee
Albacom publishes vibration and environmental testing at its Dundee facilities, including hot and cold testing, thermal cycling, three-axis shock and vibration, and high-voltage measurements for components and assemblies.
Reviewed by Arc · About this review
Key facts
- Dundee test facilities
- The service page locates the custom-built vibration and environmental testing facilities in Dundee and the company footer gives the George Buckman Drive address.
Testing capabilities
Shock and three-axis vibration
Albacom describes controlled shock testing and vibration testing over three axes for components and assemblies.
Temperature and thermal cycling
The page lists hot and cold temperature testing and thermal cycling for electrical components and assemblies.
High-voltage measurements
The Dundee workshop is described as carrying out high-voltage measurements in DC or AC.
Equipment and published limits
| Specification | Published value | Conditions |
|---|---|---|
| Published temperature extremes | −55°C to +150°C | The page publishes this range for thermocycling electrical components and assemblies; confirm the required profile and test setup. |
| Published high-voltage limit | Up to 30 kV DC or AC | The page publishes this limit for high-voltage measurements at the Dundee workshop. |
Access and contact
The page lists Peter Carty and John Wilson as key contacts, and publishes sales@albacom.co.uk and +44 (0)1382 889311. Confirm item fit, method, profile, instrumentation, capacity and lead time.
Facility contact
- Address
- 5 George Buckman Drive
Dundee, DD2 3SP
Scotland, UK - sales@albacom.co.uk
- Telephone
- +44 (0)1382 889311
- Website
- Official test house website
Standards and accreditation
Public information not available. Contact test facility provider for more information.
What to confirm with the facility
- Confirm the exact shock or vibration profile, frequency and force limits, temperature profile, electrical setup, fixture and instrumentation needs, reporting, capacity and availability before commissioning.
Before requesting a test
Public information not available. Contact test facility provider for more information.
Frequently asked questions
Public information not available. Contact test facility provider for more information.
Related testing facilities
Public information not available. Contact test facility provider for more information.
Further reading
Public information not available. Contact test facility provider for more information.
Sources and review
Arc reviewed Albacom’s current vibration and environmental testing page on 30 September 2026. No facility-specific accreditation or test-standard scope was published on that page, and availability is unconfirmed.
Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.
Vibration and Environmental Testing
The current Albacom page identifies its Dundee facilities and publishes hot and cold testing, thermal cycling, three-axis shock and vibration, and high-voltage measurement capability with contacts. It does not publish an accreditation scope, vibration limits, chamber dimensions or current availability.