Applus+ 3C Test Silverstone Laboratory
3C TestSilverstone, Northamptonshire
UKAS schedule 1204 lists two 3C Test laboratories at Silverstone: location A at Silverstone Technology Park, NN12 8GX, for EMC testing, and location B at Unit 1505 Silverstone Park, NN12 8FU, for EMC and environmental testing.
Reviewed by Arc · About this review
Key facts
- Two accredited Silverstone locations
- The schedule assigns EMC testing to location A at NN12 8GX and EMC plus environmental testing to location B at Unit 1505, NN12 8FU.
Testing capabilities
EMC testing at locations A and B
The accredited scope lists civil EMC tests for aerospace equipment and other products, including conducted-emissions work at both Silverstone locations.
Environmental testing at location B
The accredited scope assigns environmental testing to location B and lists climatic tests together with vibration and shock testing at that location.
Equipment and published limits
| Specification | Published value | Conditions |
|---|---|---|
| Published climatic limits at location B | Low temperature to −70°C; high temperature to +200°C; humidity 10–95% | These are separate limits published in the climatic scope and are not presented as one simultaneous envelope. |
| Published vibration limits at location B | 5–3300 Hz; up to 100 g peak; up to 200 kN thrust; maximum payload 5,250 kg | The schedule lists these values for vibration; confirm the applicable standard, axis, fixture and achievable combined profile. |
| Published shock limits at location B | Up to 200 g peak; up to 200 kN thrust; maximum payload 5,250 kg | The schedule lists these values for shock; confirm pulse, duration, fixture and applicable combined limits. |
Access and contact
The operator page publishes sales.3c@applus.com and +44 (0)1327 857500. The UKAS schedule also lists Mr Shaun Butler and shaun.butler@applus.com. Confirm the correct location, item fit, method, profile, capacity and lead time.
Facility contact
- Address
- Silverstone Technology Park, Silverstone Circuit
Silverstone, Northamptonshire, NN12 8GX
United Kingdom - sales.3c@applus.com
- Telephone
- +44 (0)1327 857500
- Website
- Official test house website
Standards and accreditation
- ISO/IEC 17025:2017 accreditation
- UKAS schedule 1204 states ISO/IEC 17025:2017 accreditation and defines a flexible scope for the listed sections and internal procedure, subject to the schedule’s stated boundaries.
What to confirm with the facility
- Confirm whether work will use location A or B, and verify the current accredited method, product type, electrical configuration, environmental profile, fixture, monitoring, reporting, capacity and availability.
Before requesting a test
Public information not available. Contact test facility provider for more information.
Frequently asked questions
Public information not available. Contact test facility provider for more information.
Related testing facilities
Public information not available. Contact test facility provider for more information.
Further reading
Public information not available. Contact test facility provider for more information.
Sources and review
Arc reviewed the current Applus+ 3C Test website and UKAS schedule 1204 on 30 September 2026. Published limits are shown as separate schedule entries; availability and simultaneous combinations remain unconfirmed.
Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.
The current operator website identifies the Applus+ 3C Test brand, both Silverstone addresses and its sales contact. The UKAS schedule provides the controlling site split and accredited scope used in this guide.
Schedule of Accreditation 1204: 3C Test
Issue 072, dated 10 July 2026, separates location A at NN12 8GX for EMC testing from location B at NN12 8FU for EMC and environmental testing. The guide preserves that split and presents selected published limits rather than implying a combined operating envelope.