Building Testing Woking Laboratory
Building TestingWoking, Surrey
UKAS schedule 2560 identifies Building Testing at Unit 12, Wintonlea Industrial Estate, Monument Way West, Woking, Surrey, GU21 5EN. The organisation is accredited to ISO/IEC 17025:2017, and the schedule identifies the Woking laboratory for building-hardware and flooring dimensional, fire, mechanical, performance and physical tests.
Reviewed by Arc · About this review
Key facts
- Accredited Woking laboratory
- UKAS schedule 2560, issue 015 dated 11 April 2024, identifies Building Testing at Unit 12, Wintonlea Industrial Estate, Monument Way West, Woking, Surrey, GU21 5EN and states ISO/IEC 17025:2017 accreditation.
- Published construction and product scope
- The UKAS schedule identifies the Woking laboratory for building-hardware and flooring dimensional, fire, mechanical, performance and physical tests. Its detailed entries cover platform-floor systems and air grilles/floor-mounted air terminal devices.
- Contact route
- Building Testing’s current homepage lists the Woking address, telephone number and email address.
Testing capabilities
Platform-floor system testing
UKAS schedule 2560 lists laboratory entries for full and partial access-floor systems, including loading, rolling load, pedestrian dynamic load, impact, thermal, humidity and air-leakage tests. The detailed schedule identifies the applicable method for each entry.
Air-grille and floor-terminal-device testing
The UKAS schedule lists laboratory entries for air grilles and floor-mounted air terminal devices, including static loading, rolling load, safety-factor load, soft-body impact and impact load.
Equipment and published limits
| Specification | Published value | Conditions |
|---|---|---|
| Published platform-floor loading entries | Safety-factor load: 4.5 to 22 kN; pedestal vertical load: 8.1 to 18 kN; pedestal horizontal load: 9 to 50 kgf | These are separate UKAS schedule entries for specified platform-floor configurations and methods. Confirm the relevant product, method and test configuration for a particular programme. |
| Published air-grille/floor-terminal safety-factor entry | Safety-factor load: 4.5 to 22 kN | UKAS schedule 2560 lists this for air grilles/floor-mounted air terminal devices under PSA MOB PF2PS/SPU Appendix A, Method A.00. Confirm the relevant product and method for a particular programme. |
Access and contact
Building Testing’s current homepage lists the Woking address, telephone number and email address. The reviewed sources do not publish current capacity, quotation terms, lead time or acceptance of a particular item; confirm these with the provider before dispatch.
Facility contact
- Address
- Unit 12, Wintonlea Industrial Estate, Monument Way West
Woking, Surrey, GU21 5EN
United Kingdom - Telephone
- +44 (0)1483 766999
- Website
- Official test house website
Standards and accreditation
- ISO/IEC 17025:2017 accreditation
- UKAS schedule 2560 states that Building Testing is accredited to ISO/IEC 17025:2017. It identifies the Woking laboratory and specifies the detailed scope, methods and locations for the listed tests.
- Published platform-floor references
- The schedule lists PSA MOB PF2PS/SPU sections for its platform-floor entries, plus BS EN 13264:2001 for specified air-grille and floor-mounted air-terminal-device entries. Confirm the required method and configuration with the provider.
What to confirm with the facility
- The UKAS schedule defines tests, methods and locations by scope entry. Do not treat ISO/IEC 17025 accreditation as covering every service, configuration or requested test without confirming the applicable entry.
- The reviewed sources provide an information route but do not publish current availability, pricing, lead time, sample acceptance or reporting terms. Obtain these directly from Building Testing before arranging shipment.
Before requesting a test
Public information not available. Contact test facility provider for more information.
Frequently asked questions
Is the Woking laboratory accredited to ISO/IEC 17025?
UKAS schedule 2560 states that Building Testing is accredited to ISO/IEC 17025:2017 and identifies Unit 12, Wintonlea Industrial Estate, Monument Way West, Woking, Surrey, GU21 5EN as a laboratory location. The detailed schedule defines the test scope, methods and locations, so confirm the applicable entry for a particular programme.
What platform-floor testing does the published scope list?
UKAS schedule 2560 lists full and partial platform-floor system entries including loading, rolling load, pedestrian dynamic load, impact, thermal, humidity and air-leakage tests. The method and configuration vary by entry, so confirm the relevant product and scope before arranging a test.
Related testing facilities
Public information not available. Contact test facility provider for more information.
Further reading
Public information not available. Contact test facility provider for more information.
Sources and review
Sources were retrieved directly from the original UKAS accreditation schedule and Building Testing homepage on 30 September 2026. This review records published identity, scope and contact information only.
Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.
Schedule of Accreditation 2560: Building Testing
Issue 015, dated 11 April 2024, identifies the Woking laboratory, ISO/IEC 17025:2017 accreditation and detailed construction and product testing scope. It does not establish current availability, commercial terms or acceptance of a particular item.
Building Testing and Inspection Services
First-party page used for the displayed Woking address and contact details. It describes construction and consumer-product testing but does not publish a confirmed booking, price, capacity, lead time or item-acceptance commitment.