Castings Technology International Rotherham metallurgical laboratory
Castings Technology InternationalRotherham, South Yorkshire
Castings Technology International publishes its Rotherham address and a titanium-castings page that lists metallurgical, non-destructive testing and metrology services. The page names chemical analysis, inspection and CMM and laser-scanning services, alongside a specific X-Ray entry.
Reviewed by Arc · About this review
Key facts
- Rotherham metallurgical, NDT and metrology services
- The provider publishes its Advanced Manufacturing Park address in Rotherham and describes metallurgical laboratory, non-destructive testing and metrology departments on its titanium-castings page.
- Named X-Ray entry
- Within its X-Ray entry, the provider lists ISO/IEC 17025, Nadcap (AC7114/4) and a 320 kV X-Ray.
Testing capabilities
Metallurgical analysis and metrology
The provider lists optical-emission spectrometry, chemical analysis, combustion and gas-fusion chemical analysis, hardness testing, microstructural examination, CMM and laser scanning.
Non-destructive inspection
The provider lists radiography, dye-penetrant, magnetic-particle and ultrasonic inspection among its testing services.
Equipment and published limits
| Specification | Published value | Conditions |
|---|---|---|
| Published X-Ray equipment | 320 kV X-Ray | This appears within the provider’s named X-Ray entry and is not a general operating range, a facility-wide specification or confirmation of suitability for a requested item. |
Access and contact
The provider publishes a contact form, info@castingstechnology.com, +44 (0)114 553 6393 and the Rotherham address. Confirm the item, method, accreditation applicability, reporting requirements, availability and lead time directly.
Facility contact
- Address
- Advanced Manufacturing Park, Brunel Way
Rotherham, South Yorkshire, S60 5WG
United Kingdom - Telephone
- +44 (0)114 553 6393
- Website
- Official test house website
Standards and accreditation
- Provider-published X-Ray entry
- The provider’s named X-Ray entry lists ISO/IEC 17025 and Nadcap (AC7114/4), alongside a 320 kV X-Ray.
What to confirm with the facility
- Confirm the item, method, inspection or analysis conditions, reporting requirements, accreditation applicability and current availability directly with the provider.
Before requesting a test
Public information not available. Contact test facility provider for more information.
Frequently asked questions
Public information not available. Contact test facility provider for more information.
Related testing facilities
Public information not available. Contact test facility provider for more information.
Further reading
Public information not available. Contact test facility provider for more information.
Sources and review
Arc reviewed Castings Technology’s current titanium-castings and contact pages on 30 September 2026. The guide retains the provider’s published Rotherham contact details, metallurgical, non-destructive testing and metrology service list, and named X-Ray entry. The ISO/IEC 17025 and Nadcap wording is kept only with that named X-Ray entry; no facility-wide or service-wide accreditation scope, booking, capacity, price, lead time or item acceptance is claimed.
Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.
Castings Technology titanium-castings page
The current titanium-castings page identifies Castings Technology International and lists the published metallurgical, non-destructive testing and metrology services, including the named X-Ray entry.
Castings Technology contact page
The current contact page publishes a contact form, telephone number, info@castingstechnology.com and the Rotherham address.