Skip to content

City St George's Low Turbulence Wind Tunnel

City, University of LondonLondon

NWTF lists City St George's Low Turbulence Wind Tunnel as an active low-speed, closed-return facility in London. Its current facility page says the tunnel is used for laminar-to-turbulent transition and two- and three-dimensional boundary-layer studies, and lists a 0.91 m × 0.91 m × 3 m test section.

Reviewed by Arc · About this review

Key facts

Published research use
NWTF says the tunnel is exclusively used for laminar-to-turbulent transition studies because of its very low turbulence intensity, and that both two- and three-dimensional boundary-layer studies are carried out there.
Published facility status
The NWTF facility page lists the tunnel as active, low speed and closed return, with City University London at Northampton Square, London, EC1V 0HB as owner.

Testing capabilities

Transition and boundary-layer studies

NWTF says the tunnel is used for laminar-to-turbulent transition studies and for both two- and three-dimensional boundary-layer studies. Its page also says commercial contract projects use the facility, including collaborations with Airbus and Bombardier among others.

Flow measurement and visualisation

The facility page lists 64-channel simultaneous data acquisition for pressure and velocity outputs, hot-wire anemometry, and flow visualisation by video, tuft and surface fluorescent oilflow.

Equipment and published limits

Published equipment limits and conditions
SpecificationPublished valueConditions
Test section and maximum flow speed0.91 m × 0.91 m × 3 m test section; 45 m/s maximum flow speedThese are published facility figures. Confirm the usable model envelope, blockage, support arrangement and applicable flow conditions for a particular programme.
Published turbulence intensity< 0.01% up to 20 m/sThe facility page states this turbulence-intensity figure for speeds up to 20 m/s. It should not be extrapolated to every speed, model or measurement arrangement.

Access and contact

The NWTF facility page links to a Get in contact route. NWTF's contact page says users interested in its facilities can submit a Facilities enquiry and asks for requested wind-speed range, maximum model dimensions, measurements, testing days and preferred timing. Confirm the tunnel's current availability, technical suitability and any acceptance conditions with NWTF.

Facility contact

Address
Northampton Square
London, EC1V 0HB
United Kingdom

Standards and accreditation

Public information not available. Contact test facility provider for more information.

What to confirm with the facility

  • Published turbulence, speed and test-section figures do not establish the usable envelope for a particular model, support system, measurement plan or test condition. Confirm those details with the facility.

Before requesting a test

Public information not available. Contact test facility provider for more information.

Frequently asked questions

What study types does the tunnel publish?

NWTF says the tunnel is exclusively used for laminar-to-turbulent transition studies and that both two- and three-dimensional boundary-layer studies are carried out there. It also lists commercial contract projects, including collaborations with Airbus and Bombardier among others. Confirm the applicability to a particular model and test plan with the facility.

Public information not available. Contact test facility provider for more information.

Further reading

Public information not available. Contact test facility provider for more information.

Sources and review

Arc reviewed the linked NWTF facility and contact pages on 30 September 2026 by direct HTTP retrieval. This is a review of published information, not a facility inspection, test witnessing or confirmation of availability. Confirm model suitability, technical conditions and scheduling with NWTF.

Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.

  1. City, University of London Low Turbulence Wind Tunnel

    National Wind Tunnel Facility · Reviewed

    NWTF's current facility page is used for the tunnel identity, ownership, location, status, published study types, measurements and technical figures. It does not state accreditation, item acceptance or a booking commitment.

  2. Contact NWTF

    National Wind Tunnel Facility · Reviewed

    NWTF's current contact page provides a facilities-enquiry route and lists information it asks prospective users to provide. It does not confirm availability or acceptance at this specific tunnel.