Dynamic Marine Component (DMaC) Test Facility
University of ExeterPenryn, Cornwall
The University of Exeter describes DMaC as a purpose-built test rig at Penryn Campus, Cornwall, intended to replicate forces and motions experienced by marine components in offshore applications. Its current facility page and linked specification PDF publish different dynamic-force figures, so users should confirm the current configuration; both sources describe 1 m displacement, ±30° pitch/roll and fresh-water submersion context.
Reviewed by Arc · About this review
Key facts
- University of Exeter Penryn Campus facility
- The University of Exeter page places DMaC within its Renewable Energy Research Group at Penryn Campus, Cornwall.
- Published experimental purpose
- The page describes DMaC as a purpose-built rig intended to replicate forces and motions experienced by marine components in offshore applications.
Testing capabilities
Published marine-component force and motion replication
The page says the rig is intended to replicate offshore marine-component forces and motions, using a tailstock for tension, compression forces or displacement and a two-degree-of-freedom headstock for bending moments and angular displacement.
Published fresh-water submersion context
The page says components can be submerged in fresh water for testing in a wet environment.
Equipment and published limits
| Specification | Published value | Conditions |
|---|---|---|
| Published dynamic-force figures conflict | 20 tonnes on the current facility page; 30 tonnes in the linked DMaC specification PDF | The reviewed University of Exeter sources publish different dynamic-force figures. Neither figure is presented here as a definitive current limit. Confirm the current rig configuration, force profile, component geometry, fixture and test suitability directly. |
| Published displacement and angular limits | Up to 1 m displacement; ±30° pitch/roll | These values appear in both reviewed University of Exeter sources. Confirm the required motion, loading, configuration and test suitability directly. |
Access and contact
The page invites experimental-requirements enquiries at DMaC@exeter.ac.uk. Confirm the test component, configuration, availability, reporting, price and lead time directly.
Facility contact
- Address
- Penryn Campus
Penryn, Cornwall, TR10 9FE
United Kingdom - DMaC@exeter.ac.uk
- Website
- Official test house website
Standards and accreditation
- Published ISO 9001:2015 quality-management statement
- The DMaC page says its Quality Management System is accredited to ISO 9001:2015 by the British Standards Institute and applies to the design, test and report on experimental services of marine components. This is a provider-published quality-management statement, not an ISO/IEC 17025 testing-accreditation claim.
What to confirm with the facility
- Confirm the component, force and motion profile, dimensions, fixtures, wet-environment setup, standards applicability, current quality-certification scope, availability, reporting, price and lead time directly with DMaC.
Before requesting a test
Public information not available. Contact test facility provider for more information.
Frequently asked questions
Public information not available. Contact test facility provider for more information.
Related testing facilities
Public information not available. Contact test facility provider for more information.
Further reading
Public information not available. Contact test facility provider for more information.
Sources and review
Arc reviewed the current University of Exeter DMaC page and its linked DMaC specification PDF on 30 September 2026. The sources publish different dynamic-force figures, 20 tonnes on the page and 30 tonnes in the PDF, so the guide presents both figures and asks users to confirm current configuration. It retains the provider’s rig purpose, fresh-water submersion context and quality-management statement in their stated contexts, and treats the email as an experimental-requirements enquiry route only.
Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.
Dynamic Marine Component (DMaC) Test Facility
The current first-party page establishes DMaC’s Penryn identity, published purpose, published rig limits, fresh-water submersion context, ISO 9001:2015 quality-management statement and experimental-requirements enquiry route. It does not establish an accepted test, capacity, availability, price, lead time or suitability for a particular component.
The linked University of Exeter DMaC specification sheet publishes a 30-tonne maximum dynamic-force figure, 1 m stroke, ±30° X/Y bending displacement and full fresh-water submersion operation. The current facility page publishes a different 20-tonne dynamic-tensile-force figure. The guide discloses the discrepancy and does not treat either number as a definitive current limit.