ENNOVI Plating Research and Development Centre
ENNOVIMotherwell, Scotland
ENNOVI’s current locations page identifies its Plating Research and Development Centre at Biocity Scotland in Motherwell and describes a focus on advanced surface-finishing technologies and plating R&D. Current UKAS Schedule 22856, issue 005 dated 23 July 2026, identifies the ENNOVI UK entity at that address and details the specified ISO/IEC 17025:2017 testing scope.
Reviewed by Arc · About this review
Key facts
- Published plating R&D centre
- ENNOVI’s current locations page identifies the ENNOVI Plating Research and Development Centre at Biocity Scotland in Motherwell and says it focuses on developing advanced surface-finishing technologies.
- Current UKAS schedule
- UKAS Schedule 22856, issue 005 dated 23 July 2026, identifies the ENNOVI UK entity at the Ennovi Plating Research and Development Centre in Motherwell and states accreditation to ISO/IEC 17025:2017.
Testing capabilities
Published plating R&D focus
ENNOVI’s current locations page says its dedicated Plating R&D Center focuses on developing advanced surface-finishing technologies and plating solutions such as IndiCoat.
Published specified testing activities
UKAS Schedule 22856 lists specified physical and chemical testing activities for metallic and non-metallic coatings, organic and inorganic coatings or materials, and electronic components, components and assemblies at the Motherwell address.
Equipment and published limits
| Specification | Published value | Conditions |
|---|---|---|
| Current UKAS-accredited testing scope examples | UKAS Schedule 22856 lists coating-thickness and adhesion tests, XRF, coulometry and SEM/EDX work for metallic and non-metallic coatings; adhesion and infrared work for organic and inorganic coatings or materials; and specified cleanliness, dimensional and ionic-analysis tests for electronic components, components and assemblies. | This is a high-level summary of current published Schedule 22856. The schedule contains exact standards, test types and measurement details; confirm the applicable current scope, sample configuration and acceptance directly with ENNOVI. |
Access and contact
ENNOVI’s current locations page lists +44 1698 678411 at the Motherwell centre. UKAS Schedule 22856 lists William.Waugh@uk.ennovi.com. Treat these as information routes and confirm applicable scope, sample configuration, availability, reporting, price and lead time directly with ENNOVI.
Facility contact
- Address
- c/o Biocity Scotland, Bo’ness Road, Newhouse
Motherwell, Scotland, ML1 5UH
United Kingdom - Telephone
- +44 (0)1698 678411
- Website
- Official test house website
Standards and accreditation
- UKAS Schedule 22856, ISO/IEC 17025:2017
- UKAS Schedule 22856, issue 005 dated 23 July 2026, states that the ENNOVI UK entity is accredited to ISO/IEC 17025:2017 for testing performed at the listed Motherwell address. Use the schedule for the precise accredited activities, standards, test types and measurement details, and confirm the applicable current scope directly with ENNOVI.
What to confirm with the facility
- Confirm the applicable accredited scope, exact standard, test type, sample configuration, acceptance criteria, availability, reporting, price and lead time directly with ENNOVI.
Before requesting a test
Public information not available. Contact test facility provider for more information.
Frequently asked questions
Public information not available. Contact test facility provider for more information.
Related testing facilities
Public information not available. Contact test facility provider for more information.
Further reading
Public information not available. Contact test facility provider for more information.
Sources and review
Arc reviewed ENNOVI’s current locations and standards pages and UKAS Schedule 22856, issue 005 dated 23 July 2026. The locations page supplies the published Motherwell facility identity, contact route and R&D focus. The UKAS schedule supplies the specified ISO/IEC 17025:2017 testing scope at that address. Confirm the exact current scope, sample configuration and terms directly with ENNOVI.
Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.
ENNOVI’s current locations page is used for the published Motherwell plating R&D-centre identity, address, telephone and stated surface-finishing and plating R&D focus. It does not establish a particular test method, sample configuration, booking, availability, capacity, price, lead time or acceptance.
Standards & Certifications | ENNOVI
ENNOVI’s current standards page lists UK Scotland’s Plating R&D Centre with ISO 14001:2015 and ISO 17025:2017. The guide relies on UKAS Schedule 22856 for the independent current facility-specific testing accreditation scope.
UKAS Schedule 22856: ENNOVI ADVANCED MOBILITY SOLUTIONS UK LIMITED
UKAS Schedule 22856, issue 005 dated 23 July 2026, is used for the Motherwell location and specified ISO/IEC 17025:2017 testing scope. The guide does not generalise the schedule beyond its exact activities, standards, test types and measurement details.