Skip to content
Arc

Evolution Fasteners Glasgow Testing Laboratory

Evolution Fasteners (UK)Glasgow

UKAS Schedule 7485, issue 013 dated 19 May 2026, identifies Evolution Fasteners (UK) at 268 Nuneaton Street, Glasgow, G40 3DX, with testing performed at that address only. The schedule lists Vickers hardness for metals, alloys and metal products, plus defined withdrawal-force, pull-through-force, drilling-time, coating-mass and neutral-salt-spray entries for mechanical fasteners.

Reviewed by Arc · About this review

Key facts

Current UKAS-listed Glasgow testing site
UKAS Schedule 7485, issue 013 dated 19 May 2026, identifies Evolution Fasteners (UK) at 268 Nuneaton Street, Glasgow, G40 3DX, and says testing is performed at that address only.
Defined fastener and hardness entries
The detailed schedule lists Vickers hardness for metals, alloys and metal products, and withdrawal force, pull-through force, drilling time, coating mass and neutral salt spray for specified mechanical fasteners.

Testing capabilities

Published Vickers-hardness entry

UKAS Schedule 7485 lists Vickers hardness at HV0.3 and HV1 for metals, alloys and metal products, using BS EN ISO 6507-1:2023.

Published mechanical-fastener entries

UKAS Schedule 7485 lists withdrawal force, pull-through force, drilling time, coating mass and neutral salt spray for specified mechanical fasteners, including nails, screws and staples.

Equipment and published limits

Public information not available. Contact test facility provider for more information.

Access and contact

UKAS Schedule 7485 publishes 268 Nuneaton Street, Glasgow, G40 3DX; +44 (0)141 647 7100; and ryan@evolutionfasteners.co.uk for Evolution Fasteners (UK). Treat these as information routes and confirm the applicable product, test, method, configuration, reporting, availability, price and lead time directly.

Facility contact

Address
268 Nuneaton Street
Glasgow, G40 3DX
United Kingdom

Standards and accreditation

UKAS Schedule 7485, ISO/IEC 17025:2017
UKAS Schedule 7485, issue 013 dated 19 May 2026, states ISO/IEC 17025:2017 accreditation for Evolution Fasteners (UK), with testing performed at the Glasgow address only. The schedule lists the precise products, tests and methods; confirm the applicable current scope directly.

What to confirm with the facility

  • Confirm the exact product, test and standard edition, method, specimen configuration, coating, test conditions, reporting, availability, price and lead time directly with Evolution Fasteners (UK).

Before requesting a test

Public information not available. Contact test facility provider for more information.

Frequently asked questions

Public information not available. Contact test facility provider for more information.

Public information not available. Contact test facility provider for more information.

Further reading

Public information not available. Contact test facility provider for more information.

Sources and review

Arc reviewed Evolution Fasteners’ current company page and UKAS Schedule 7485, issue 013 dated 19 May 2026. The company page supplies published Glasgow laboratory context; the schedule supplies the independent site-only accreditation statement, contact route and defined listed testing entries. The current provider page uses a different Glasgow trade-park address for its general contact route, so the guide presents the UKAS-listed testing address and records the distinction. Confirm the exact current scope, test configuration and terms directly with Evolution Fasteners (UK).

Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.

  1. Construction Fixings, Masonry Screws and Fastener Systems - Evolution Fasteners

    Evolution Fasteners (UK) · Reviewed

    Evolution Fasteners’ current page is used for published Glasgow laboratory context and a company contact route. It does not establish the independent detailed UKAS scope, booking, availability, capacity, price, lead time or acceptance of a particular programme.

  2. UKAS Schedule 7485: Evolution Fasteners (UK)

    United Kingdom Accreditation Service · Reviewed

    UKAS Schedule 7485, issue 013 dated 19 May 2026, is used for Evolution Fasteners (UK)’s ISO/IEC 17025:2017 statement, 268 Nuneaton Street site-only testing statement, information route and defined metals/alloys and mechanical-fastener entries. The guide does not generalise the schedule beyond its listed products, tests, standards, methods, conditions, exclusions or limits.