GB METECC EMC Test Facility
GB METECC (UK)Littlehampton
GB METECC (UK)’s current first-party pages identify its Littlehampton EMC facility and publish an information route. The provider describes radiated and conducted emissions and immunity testing, selected chamber frequency ranges, safety-compliance documentation support, and design-management and consultancy context. Its pages refer to pre-compliance and self-certification context; this guide does not assert accreditation or a particular product’s compliance.
Reviewed by Arc · About this review
Key facts
- Published Littlehampton EMC facility and information route
- GB METECC (UK)’s current pages identify Unit 2, Minster Court, Courtwick Lane, Wick, Littlehampton, BN17 7RN, and publish +44 (0)1903 942 297 and contact@gbmetecc.com.
- Published pre-compliance and self-certification context
- The current home page describes EMC and environmental pre-compliance and self-certification equipment. The services page distinguishes early-stage pre-compliance from full compliance testing at an accredited laboratory.
Testing capabilities
Published emissions and immunity testing context
GB METECC’s current pages describe full EMC emissions and immunity testing support. The services page lists radiated and conducted emissions, radiated electric-field, radiated magnetic-field, common-mode RF, electrical-fast-transient, electrostatic-discharge, surge, and dips-and-interruptions testing context.
Published safety-documentation and design-support context
The current pages describe safety evaluations, technical-file review, standards-selection guidance, and hardware, software and firmware design-management and consultancy context.
Equipment and published limits
| Specification | Published value | Conditions |
|---|---|---|
| Published chamber test-frequency context | The home page describes a 3-metre semi-anechoic chamber for radiated emissions from 9 kHz to 18 GHz, conducted emissions from 150 kHz to 30 MHz, radio testing up to 25 GHz, and immunity testing to 6 GHz. | These are selected ranges published by GB METECC for its current chamber description. They are not a complete equipment inventory, accreditation statement, universal capacity statement or confirmation that a particular product can be tested. Confirm the applicable product, standard, method, configuration, test level, reporting, availability and terms directly with GB METECC (UK). |
Access and contact
GB METECC (UK)’s current pages list Unit 2, Minster Court, Courtwick Lane, Wick, Littlehampton, BN17 7RN, +44 (0)1903 942 297 and contact@gbmetecc.com. Treat these as information routes and confirm the applicable product, standard, configuration, accreditation requirements, availability, price and lead time directly with GB METECC (UK).
Facility contact
- Address
- Unit 2, Minster Court, Courtwick Lane, Wick
Littlehampton, BN17 7RN - contact@gbmetecc.com
- Telephone
- +44 (0)1903 942 297
- Website
- Official test house website
Standards and accreditation
- Published EMC test references and regulatory context
- GB METECC’s current services page cites CISPR 11, CISPR 32, EN 55032, EN 55011, EN IEC 61000-3-2, EN IEC 61000-3-3, EN IEC 61000-6-3, EN IEC 61000-4-2 through -6, -8, -11 and -29. Its about page identifies an ISO-aware internal process and says procedures reflect ISO 17025 best practices; it does not state UKAS accreditation. Confirm the applicable current standard, edition, test parameters and accreditation requirement directly.
What to confirm with the facility
- Confirm the exact current product, standard and edition, method, chamber configuration, test level, reporting, accreditation requirement, availability, price and lead time directly with GB METECC (UK).
Before requesting a test
Public information not available. Contact test facility provider for more information.
Frequently asked questions
Public information not available. Contact test facility provider for more information.
Related testing facilities
Public information not available. Contact test facility provider for more information.
Further reading
Public information not available. Contact test facility provider for more information.
Sources and review
Arc reviewed GB METECC (UK)’s current first-party home, services and about pages on 30 September 2026. The pages identify a Littlehampton information route and publish EMC pre-compliance, chamber, safety-documentation and design-support context. The services page explicitly distinguishes pre-compliance from full compliance testing at an accredited laboratory, and the about page describes ISO 17025 best practices without stating UKAS accreditation. Confirm the exact current test scope, configuration, accreditation requirement and terms directly with GB METECC (UK).
Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.
EMC Compliance Experts | GB METECC (UK) Ltd
GB METECC’s current first-party home page is used for the Littlehampton identity and information route, published EMC pre-compliance/self-certification context, chamber description and selected frequency ranges. It does not establish accreditation, a complete equipment inventory, universal capacity, any particular product’s compliance, booking, availability, price, lead time or acceptance of a particular programme.
GB METECC’s current first-party services page is used for published emissions, immunity, safety-documentation and design-support context, cited test references, and its distinction between pre-compliance and full compliance testing at an accredited laboratory. It does not state that GB METECC itself is accredited or establish a complete scope, booking, availability, capacity, price, lead time or acceptance of a particular programme.
GB METECC’s current first-party about page is used for provider context and its statement that internal procedures reflect ISO 17025 best practices. It does not state UKAS accreditation, a complete accreditation scope, booking, availability, capacity, price, lead time or acceptance of a particular programme.