J.C.S.Technology Weston-super-Mare testing laboratory
JCS TechnologyWeston-super-Mare, North Somerset
UKAS Schedule 2154, issue 030 dated 3 October 2025, identifies JCS Technology at Unit 8B, B W Estates, Oldmixon Crescent, Weston-super-Mare, North Somerset, BS24 9BA and states that testing is performed at that address only. The schedule records ISO/IEC 17025:2017 accreditation for a flexible scope and detailed listed entries in mechanical, corrosion, biological, flammability, chemical, physical and environmental testing. JCS Technology’s current pages publish the same Weston-super-Mare site in a fuller address form and describe materials-and-products testing and consultancy. This guide confines accreditation and technical claims to the schedule’s listed site, activities, products, methods, standards, conditions, ranges and limits.
Reviewed by Arc · About this review
Key facts
- Current UKAS-listed Weston-super-Mare laboratory
- UKAS Schedule 2154, issue 030 dated 3 October 2025, identifies JCS Technology at Unit 8B, B W Estates, Oldmixon Crescent, Weston-super-Mare, North Somerset, BS24 9BA and states that testing is performed at that address only.
- Published JCS information route
- JCS Technology’s current contact page publishes Unit 8 B.W. Estates, Oldmixon Crescent, Weston-super-Mare, North Somerset, BS24 9BA; +44 (0) 1934 644866; Contact@JCS-Tech.co.uk; and Technical Manager Ken James.
Testing capabilities
Current UKAS-listed materials and products testing
At the listed Weston-super-Mare site, Schedule 2154 records defined mechanical tests for adhesive joints, plastics and plastic film or adhesive; corrosion tests for metals, alloys and metal products; biological tests; flammability testing; chemical and physical tests; and defined environmental-test entries. Each statement remains subject to the schedule’s stated materials or products, methods, standards, conditions, ranges and limits.
Selected current UKAS-listed entries at the listed site
Selected Schedule 2154 entries include climbing-drum peel, flexural, compressive, interlaminar-shear, tensile and peel tests; fluid susceptibility, salt-spray and acid-corrosion tests; bedding flammability, aircraft-component burn, automotive-interior horizontal-burn, smoke-density and toxic-gas entries; and altitude, temperature, temperature-and-humidity, thermal-shock, icing, laboratory-light-source, solar-radiation and weathering entries. Use the schedule for the exact material, test, method, standard, condition, range and limit.
Equipment and published limits
| Specification | Published value | Conditions |
|---|---|---|
| Selected current UKAS Schedule 2154 boundaries | Schedule 2154 lists, among other defined entries, flexural and tensile testing for plastics including glass-reinforced plastics at forces from 0.04 to 5 kN in ambient atmosphere; artificial-atmosphere corrosion entries; defined bedding, aircraft-component and automotive-interior flammability entries; and environmental entries including altitude, temperature, temperature and humidity, thermal shock, icing, laboratory light-source exposure, solar radiation and weathering. | This is a selected summary of current Schedule 2154 entries, rather than a complete equipment inventory or unrestricted capability claim. Confirm the exact listed material, product, test, method, standard edition, condition, range, limit, sample requirements, reporting, availability and terms directly with JCS Technology. |
Access and contact
JCS Technology’s current contact page publishes +44 (0) 1934 644866 and Contact@JCS-Tech.co.uk for its Weston-super-Mare site. UKAS Schedule 2154 separately lists Mr K D James, +44 (0)1934-644866 and ken@jcs-tech.co.uk. Treat these as information routes and confirm the legal entity, requested service, applicable schedule entry, material or product, method, standard, condition, range, sample requirements, reporting, availability, price, lead time and terms directly with JCS Technology.
Facility contact
- Address
- Unit 8 B.W. Estates, Oldmixon Crescent
Weston-super-Mare, North Somerset, BS24 9BA
United Kingdom - Telephone
- +44 (0) 1934 644866
- Website
- Official test house website
Standards and accreditation
- UKAS Schedule 2154, ISO/IEC 17025:2017
- UKAS Schedule 2154, issue 030 dated 3 October 2025, states ISO/IEC 17025:2017 accreditation for JCS Technology and says testing is performed at the listed Weston-super-Mare address only. It describes a flexible scope for the detailed activities, subject to the schedule’s documented procedure and its listed materials, products, methods, standards, conditions, ranges and limits.
- Published ISO 9001:2015 statement
- JCS Technology’s accreditation page states “ISO 9001:2015 Certified by Advanced Certification”. This is a provider-published management-system statement; it is not presented as laboratory-test accreditation. The UKAS schedule is the source for ISO/IEC 17025:2017 testing accreditation and its detailed scope.
What to confirm with the facility
- Schedule 2154 confines testing to the listed Weston-super-Mare address and its defined activities. Its flexible-scope wording does not establish unrestricted capability, and its entries remain subject to the listed materials or products, methods, standards, conditions, ranges and limits. The schedule does not provide a complete equipment inventory, booking, availability, capacity, price, lead time or acceptance of a particular programme.
- JCS Technology’s contact page writes the first line as “Unit 8 B.W. Estates”; UKAS Schedule 2154 writes “Unit 8B, B W Estates”. The guide uses the provider’s fuller public address for identity and information routes, while accreditation and scope claims are confined to the UKAS-listed Unit 8B site.
- Confirm the applicable schedule entry, legal entity, material or product, test, method and standard edition, condition, range or limit, sample requirements, reporting, availability, price and lead time directly with JCS Technology.
Before requesting a test
Public information not available. Contact test facility provider for more information.
Frequently asked questions
Public information not available. Contact test facility provider for more information.
Related testing facilities
Public information not available. Contact test facility provider for more information.
Further reading
Public information not available. Contact test facility provider for more information.
Sources and review
Arc reviewed JCS Technology’s current contact, testing and accreditation pages and UKAS Schedule 2154, issue 030 dated 3 October 2025. The schedule identifies JCS Technology at Unit 8B, B W Estates, Oldmixon Crescent, Weston-super-Mare and limits testing to that address. It states ISO/IEC 17025:2017 accreditation for a flexible scope with defined mechanical, corrosion, biological, flammability, chemical, physical and environmental entries. JCS’s public contact page uses the fuller “Unit 8 B.W. Estates” form; this guide retains that form for published identity and routes, while confining accreditation and scope claims to the UKAS-listed site and detailed schedule boundaries. Confirm the exact current service and commercial terms directly with JCS Technology.
Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.
JCS Technology’s current contact page is used for its published Weston-super-Mare address, telephone, email and named Technical Manager. It does not independently establish current UKAS scope, methods, standards, limits, booking, availability, capacity, price, lead time or acceptance of a particular programme.
JCS Technology’s current testing page is used for general materials-and-products testing and consultancy context and published testing categories. The independent UKAS schedule, rather than this page, defines current accredited scope, the listed site, methods, standards, conditions, ranges and limits.
Accreditation - JCS Technology
JCS Technology’s current accreditation page is used for its own UKAS-laboratory-number and ISO 9001:2015 statements. ISO 9001 is retained only as a provider-published management-system statement; the independent UKAS schedule defines ISO/IEC 17025:2017 testing accreditation and detailed scope.
UKAS Schedule 2154: JCS Technology
UKAS Schedule 2154, issue 030 dated 3 October 2025, is used for JCS Technology’s legal identity, listed Weston-super-Mare site, ISO/IEC 17025:2017 statement, site-only boundary, flexible-scope wording and defined entries. It does not establish scope beyond its listed address, activities, materials, products, methods, standards, conditions, ranges and limits, or booking, availability, capacity, price, lead time or acceptance of a particular programme.