Lasermet Bournemouth laser and LED testing laboratory
LasermetBournemouth, Dorset
The UKAS PDF retrieved on 30 September 2026 is Schedule 2682, issue 014 dated 31 October 2023. It identifies Lasermet at 137 Hankinson Road, Bournemouth, Dorset, BH9 1HR, states ISO/IEC 17025:2017 accreditation and assigns defined laser-radiation and non-laser optical-radiation work to the Bournemouth Lab. It separately describes specified laser-radiation work at customer sites, subject to suitable premises and contract review. Lasermet’s current home page gives high-level laser and LED testing context, while its current Contact page publishes a Bournemouth telephone route.
Reviewed by Arc · About this review
Key facts
- UKAS-listed Bournemouth laboratory
- UKAS Schedule 2682, issue 014 dated 31 October 2023, identifies Lasermet at 137 Hankinson Road, Bournemouth, Dorset, BH9 1HR and states ISO/IEC 17025:2017 accreditation.
- Published Bournemouth information route
- Lasermet’s current Contact page lists Lasermet at Lasermet House, 137 Hankinson Rd, Bournemouth BH9 1HR with +44 0 1202 770740.
Testing capabilities
UKAS-listed laboratory laser-radiation entries
Schedule 2682 assigns defined laser-radiation-emitting-product entries to the Bournemouth Lab, covering beam geometry, optical-radiation measurements, pulse characteristics, wavelength, single-fault analysis and apparent-source-size measurement under listed standards.
UKAS-listed laboratory non-laser optical-radiation entry
Schedule 2682 assigns a 200–1650 nm spectral-range entry for non-laser optical radiation to the Bournemouth Lab, with listed BS EN 62471:2008 and IEC/TR 62471-2:2009 references.
Equipment and published limits
| Specification | Published value | Conditions |
|---|---|---|
| Published Schedule 2682 ranges and methods | Schedule 2682 specifies selected Bournemouth Lab ranges for laser radiation emitting products, including wavelength 200–1650 nm and defined beam-diameter, power, pulse-energy and pulse-width limits. It specifies a 200–1650 nm spectral range for non-laser optical radiation. | This is a bounded summary of the UKAS schedule issued 31 October 2023, not a complete test menu or equipment inventory. Confirm the exact product, measurement, standard and edition, range, condition, location code, reporting, availability and terms directly with Lasermet. |
Access and contact
Lasermet’s current Contact page publishes Lasermet at Lasermet House, 137 Hankinson Rd, Bournemouth BH9 1HR with +44 0 1202 770740. UKAS Schedule 2682 lists the same street address and telephone. Treat this as an information route and confirm the applicable product, measurement, standard, accreditation, sample or product requirements, reporting, availability, price, lead time and terms directly with Lasermet.
Facility contact
- Address
- 137 Hankinson Road
Bournemouth, Dorset, BH9 1HR
United Kingdom - Telephone
- +44 (0)1202 770740
- Website
- Official test house website
Standards and accreditation
- UKAS Schedule 2682, ISO/IEC 17025:2017
- UKAS Schedule 2682, issue 014 dated 31 October 2023, states ISO/IEC 17025:2017 accreditation for Lasermet at the listed Bournemouth address. Its Lab and Site location codes, stated methods, ranges and standards define the accredited claim.
What to confirm with the facility
- The UKAS PDF was retrieved on 30 September 2026 but bears issue date 31 October 2023. This guide reports its stated scope and does not infer later standards, a complete equipment inventory, unrestricted scope, booking, availability, capacity, price, lead time, acceptance or suitability.
- Schedule 2682 separately allocates specified laser-radiation-emitting-product work to “Site”. It says the customer’s site or premises must be suitable for the particular testing and subject to contract review arrangements. This does not establish universal customer-site availability.
- Lasermet’s current home page gives high-level laser and LED testing context. The guide does not use that summary to extend the detailed UKAS location-code scope, methods, ranges or standards.
- Confirm the exact product, measurement, standard and edition, range, location, accreditation, reporting, availability, price and lead time directly with Lasermet.
Before requesting a test
Public information not available. Contact test facility provider for more information.
Frequently asked questions
Public information not available. Contact test facility provider for more information.
Related testing facilities
Public information not available. Contact test facility provider for more information.
Further reading
Public information not available. Contact test facility provider for more information.
Sources and review
Arc reviewed Lasermet’s current home and Contact pages plus UKAS Schedule 2682 directly retrieved on 30 September 2026. The schedule is issue 014 dated 31 October 2023 and identifies Lasermet at Bournemouth with stated ISO/IEC 17025:2017, Lab and conditional customer-site entries. The guide keeps laboratory and Site boundaries distinct and does not infer current availability or universal customer-site work. Confirm the exact current scope and commercial terms directly with Lasermet.
Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.
Lasermet’s current home page describes its Bournemouth Testing Lab and gives high-level laser and LED testing context. UKAS Schedule 2682 supplies the detailed scope and location-code boundaries.
Lasermet’s current Contact page publishes Lasermet at Lasermet House, 137 Hankinson Rd, Bournemouth BH9 1HR, with +44 0 1202 770740. It is an information route, not evidence of booking or availability.
The UKAS PDF directly retrieved on 30 September 2026 is Schedule 2682, issue 014 dated 31 October 2023. It identifies Lasermet at Bournemouth, states ISO/IEC 17025:2017 accreditation and distinguishes defined Lab and Site entries.