LUX-TSI Pencoed lighting test laboratory
LUX-TSIPencoed
LUX-TSI’s official website identifies a testing laboratory at Unit 1B, Pencoed Technology Park, CF35 5AQ. Its published application content describes photometric measurements, lighting safety testing, environmental and life testing, and colour measurement. The official site provides a telephone and sales email. The site’s UKAS/ISO 17025 wording is retained as a provider assertion, with no independent current accreditation-scope verification. A facility-specific commercial EMC test service was not verified from the reviewed content.
Reviewed by Arc · About this review
Key facts
- Published laboratory address
- The official site’s contact data identifies the testing laboratory at Unit 1B, Pencoed Technology Park, Pencoed, CF35 5AQ, United Kingdom.
- Published testing work
- The site publishes photometric, safety, environmental and life-testing service descriptions, with a Type C goniometer, climatic chambers and a dark test tunnel identified.
- Public enquiry route
- The official site publishes +44 (0)1656 864618 and sales@lux-tsi.com for contact.
Testing capabilities
Photometric testing
Published photometric service content lists intensity-distribution measurements, IES / Eulumdat files, spectral analysis including CCT, duv, CRI, CQS and TM-30 indicators, and glare and flicker assessment. The provider names a Type C goniometer.
Lighting safety testing
Published safety service content covers modules, light engines and luminaires, names IEC/EN 60598 and Low Voltage Directive compliance, and lists retroreflective number-plate and road-stud testing.
Environmental and life testing
The site’s published service data lists temperature and humidity, thermal cycling using climatic chambers, drop and vibration testing, ingress protection to IEC 60529, impact protection to IEC 62262, and weathering.
Equipment and published limits
| Specification | Published value | Conditions |
|---|---|---|
| Photometric equipment | Type C goniometer | Named in the published photometric service data. Angular ranges, loading and uncertainty were not verified. |
| Dark test tunnel | 20 metres long | The published safety-testing service data lists a 20-metre-long dark test tunnel. Cross-section, sample limits and measurement conditions were not verified. |
| Colour-measurement range | 400–700 nm | The published advanced-colorimetry service data gives this wavelength range. It is not a general spectral range or accuracy specification for all photometric work. |
Access and contact
The official site’s contact and footer data publish +44 (0)1656 864618 and sales@lux-tsi.com. Use these as enquiry routes to confirm the intended product, method, sample conditions, applicable scope, current availability, quotation and lead time.
Facility contact
- Address
- Unit 1B, Pencoed Technology Park
Pencoed, CF35 5AQ
United Kingdom - sales@lux-tsi.com
- Telephone
- +44 (0)1656 864618
- Website
- Official test house website
Standards and accreditation
- Provider UKAS/ISO 17025 and method references
- The official site’s published content labels the provider “UKAS” and “ISO 17025 Accredited” and describes UKAS (ILAC)-accredited goniometric testing and LM-79 / EN13032 reports. It also names IEC/EN 60598, IEC 60529 and IEC 62262 in specific service lists. These are provider statements and method references. Arc has not independently checked a current UKAS schedule or inferred that every service is accredited.
What to confirm with the facility
- The provider’s published goniometric-testing accreditation wording is not an independently verified current schedule. Confirm the applicable method, material, location and scope for the intended result.
- The Type C goniometer, 20-metre dark tunnel and 400–700 nm colour-measurement descriptor apply to their published service contexts. Equipment capacities, operating conditions and uncertainty were not verified.
- Confirm whether the intended EMC activity is available as a testing service, along with the relevant method, equipment, scope and quotation. A facility-specific commercial EMC test service was not verified from the reviewed content.
- Confirm sample preparation, dimensions, reporting requirements, current availability, price and lead time directly before arranging work.
Before requesting a test
Public information not available. Contact test facility provider for more information.
Frequently asked questions
Public information not available. Contact test facility provider for more information.
Related testing facilities
Public information not available. Contact test facility provider for more information.
Further reading
Public information not available. Contact test facility provider for more information.
Sources and review
Arc directly retrieved the official LUX-TSI homepage and its observed application module on 2026-09-30. The homepage is an HTML shell. Its application data supplies the Pencoed laboratory address, contacts and service descriptions. The evidence was statically extracted from original published literals, with source offsets and hashes retained. No browser rendering or independent accreditation-schedule check was performed. Confirm the specific test, applicable scope and arrangements directly.
Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.
The directly retrieved homepage is an HTML application shell. Its title and metadata identify LUX-TSI and lighting/photometric testing. The observed module link is the original source for the separately captured service and contact data.
LUX-TSI official application service and contact content
The exact module referenced by the official homepage contains contact data for the Pencoed testing laboratory and published service/equipment descriptions. Readable evidence was extracted from named string-literal data structures used by page components, with original bytes, offsets, method and hashes preserved. The module was not executed and no browser-rendering check was performed. UKAS/ISO 17025 wording remains a provider assertion.