Skip to content
Arc

MSMK Training

MSMK TrainingSheffield

MSMK Training operates a testing laboratory at 75 Blackstock Road, Sheffield, S14 1AD. The current contact page publishes +447884 261090 and an enquiry form. UKAS schedule 10126, issue 010 dated 29 July 2026, lists mechanical and specified-code weldment tests performed at this address only. Confirm the required method, current controlled scope and sample arrangements directly.

Reviewed by Arc · About this review

Key facts

Sheffield testing laboratory
The current contact page and dated UKAS schedule identify 75 Blackstock Road, Sheffield, S14 1AD. The testing-services page describes laboratory bend, micro and macro examinations there.
Current information route
Use +447884 261090 or the official contact-page enquiry form to discuss the required testing service.
Site restriction
UKAS schedule 10126 states that testing is performed at the above address only. This scope does not establish off-site testing.

Testing capabilities

Charpy V-notch impact testing

For metals, alloys and metal products, the dated scope lists Charpy V-notch testing from -40°C to ambient to BS EN ISO 148-1:2016. Testing is restricted to the Sheffield address.

Vickers HV10 hardness testing

For metals, alloys and metal products, Vickers hardness testing is listed under HV10 to BS EN ISO 6507-1:2018. The published condition does not establish other hardness scales. Testing is restricted to the Sheffield address.

Ambient tensile testing to ISO 4136

For metals, alloys and metal products, the dated scope lists tensile testing up to 1000 kN at ambient temperature to BS EN ISO 4136:2022. The force maximum is not a specimen-size rating. Testing is restricted to the Sheffield address.

Weldment tests to specified welding codes

For weldments in steels, ferrous and aluminium alloys, the scope lists bend, fillet fracture, macrostructure and microstructure examination, hardness and visual examination, and impact tests designated in the specified welding codes. The references are listed below. Confirm the required examination and applicable code. Testing is restricted to the Sheffield address.

Equipment and published limits

Published equipment limits and conditions
SpecificationPublished valueConditions
Charpy V-notch temperature-40°C to ambientMetals, alloys and metal products, BS EN ISO 148-1:2016, at the listed Sheffield laboratory only.
Vickers conditionHV10Metals, alloys and metal products, BS EN ISO 6507-1:2018. This is a test condition rather than a machine-capacity rating.
Tensile force and temperatureUp to 1000 kN at ambient temperatureBS EN ISO 4136:2022. The schedule does not print a lower force limit or specimen dimensions for this entry.

Access and contact

Contact MSMK Training on +447884 261090 or use the official contact-page enquiry form. Specify the material, required method or welding code and reporting needs. Confirm the current controlled scope and sample arrangements before sending material to 75 Blackstock Road, Sheffield, S14 1AD.

Facility contact

Address
75 Blackstock Road
Sheffield, S14 1AD
United Kingdom

Standards and accreditation

UKAS 10126 and ISO/IEC 17025:2017
The direct schedule names MSMK Training, issue 010 dated 29 July 2026, accredited to ISO/IEC 17025:2017 for the listed tests at 75 Blackstock Road only. Separate live accreditation status was not verified.
Specified-code weldment references
For the listed steels, ferrous and aluminium-alloy weldments, the schedule prints BS EN ISO 5173:2023, BS EN ISO 9015-1:2011, BS EN ISO 9017:2018, BS EN ISO 9016:2022, BS EN ISO 17639:2022, BS EN ISO 17637:2016, ASME IX:2025, AWS D1.1/D1.1M:2025, BS EN ISO 15614-1:2017+A1:2019, BS EN ISO 15614-2:2025, BS EN ISO 9606-1:2017, BS EN ISO 9606-2:2004, BS 4515-1:2009 and BS 4515-2:1999. Confirm which reference applies to the required examination. The list does not mean every reference applies to every test or establish unrestricted welding certification.

What to confirm with the facility

  • The dated scope restricts testing to 75 Blackstock Road, Sheffield. It lists three mechanical entries and specified-code tests for the stated weldment materials. These entries do not establish general fracture-toughness testing, other hardness scales or unrestricted tensile methods.
  • The testing-services page makes broader NDT and welder-certification statements. This guide uses the exact ISO/IEC 17025 laboratory schedule for accredited methods. Confirm any separate certification scheme or testing requirement directly.
  • Confirm specimen quantity, dimensions and preparation, quotation, turnaround time, current scope and reporting requirements directly.

Before requesting a test

Public information not available. Contact test facility provider for more information.

Frequently asked questions

Public information not available. Contact test facility provider for more information.

Public information not available. Contact test facility provider for more information.

Further reading

Public information not available. Contact test facility provider for more information.

Sources and review

Reviewed by Arc on 1 October 2026 using fresh official homepage, contact and testing-services pages and the direct UKAS 10126 PDF. The complete one-page schedule was extracted and visually checked. Its printed issue date is 29 July 2026. Exact method conditions, standard editions and the Sheffield site restriction are retained. Separate live accreditation status was not verified.

Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.

  1. Welding Test Laboratory | Sheffield, UK | MSMK Training

    MSMK Training · Reviewed

    The homepage identifies MSMK Training and the Sheffield address. Training and broad industry references are not treated as additional laboratory methods.

  2. Contact us | Welder certification | Sheffield, UK

    MSMK Training · Reviewed

    The page publishes +447884 261090, an enquiry form and 75 Blackstock Road, Sheffield, S14 1AD. Its static success message does not establish a submitted enquiry.

  3. Weld Testing & Certification | MSMK Training

    MSMK Training · Reviewed

    The page identifies the Sheffield testing laboratory and laboratory bend, micro and macro examinations. Broader NDT and personnel-certification statements are not treated as unrestricted ISO/IEC 17025 laboratory scope.

  4. UKAS schedule 10126, issue 010, 29 July 2026

    United Kingdom Accreditation Service · Reviewed

    The complete one-page schedule limits testing to 75 Blackstock Road. Exact mechanical conditions, weldment materials and printed standard editions are retained. The printed issue date differs from PDF file dates and retrieval.