Pektron Derby contract testing and validation facility
Pektron GroupDerby, Derbyshire
Pektron offers contract testing and validation in Derby for prototype confidence, design verification, pre-compliance and formal programmes. Its owner pages describe five selected test groups and publish push-pull force measurement up to 2.5 kN. The UK contact page lists Alfreton Road, Derby DE21 4AP, and the contract page gives a dedicated testing email. Conflicting thermal-shock ranges and precise operating conditions need provider confirmation. No current accredited site/method schedule was verified in the retained sources.
Reviewed by Arc · About this review
Key facts
- Owner-listed UK site
- Alfreton Road, Derby, Derbyshire DE21 4AP, United Kingdom. The owner contract page identifies Derby, and the linked UK contact page gives this address and phone. The corporate registered office corroborates the location.
- Contract testing offer
- The owner offers prototype confidence, design verification, pre-compliance evaluation and formal validation programmes, with access to its test facility and engineering support.
- Selected owner test groups
- Five selected groups cover EMC, climate/thermal-shock/HALT, vibration/shock/mechanical, ingress and electrical/chemical exposure. The owner separately states push-pull force measurement up to 2.5 kN.
- Dedicated testing enquiry
- Use testing@pektron.com to discuss the proposed work and availability. The owner’s UK phone is +44 1332 832424. General UK info@pektron.co.uk and central general/sales routes are separate.
Testing capabilities
Owner-described EMC emissions and immunity
The owner describes a purpose-built EMC chamber, emissions and immunity testing, automotive CISPR 25 work and FFT measurement technology. Its method table lists relevant emissions, ESD, radiated immunity, bulk-current injection and transient references. No numerical frequency/field envelope or accredited method allocation is assigned here.
Owner-described climate, thermal shock and HALT
The owner describes climatic chambers, humidity/exposure testing, thermal shock with automated transfer, and highly accelerated life testing. Narrative and method-table thermal-shock ranges differ without a stated equipment link. No numerical temperature, ramp-rate or combined operating envelope is allocated. Confirm the chamber, method and achievable conditions.
Owner-described vibration, shock and mechanical testing
The owner lists sinusoidal/random vibration, shock and bump, rough handling and mechanical durability testing. Push-pull force measurement is stated up to 2.5 kN. No general payload, frequency, acceleration, stroke, accuracy or combined dynamic capacity is verified in this guide.
Owner-described dust and water ingress testing
The owner describes dust, spray, jet and immersion tests, with controlled-pressure, rotating-platform and high-pressure/high-temperature water work. Its table lists BS EN 60529:1992+A2:2013 and BS ISO 20653:2013. Confirm the exact required code and specimen configuration. Owner labels are not converted into a separately verified accredited ingress code.
Owner-described electrical and chemical exposure tests
The owner describes ESD, electrical transients, voltage-performance validation and chemical exposure. The method table lists automotive electrical-load references from ISO 16750-2 and chemical-load reference BS ISO 16750-5:2010. No voltage, dose, exposure duration or universal product-compliance outcome is supplied in this guide.
Equipment and published limits
| Specification | Published value | Conditions |
|---|---|---|
| Owner push-pull force measurement | Up to 2.5 kN | Owner force-measurement statement. No stroke, speed, accuracy, specimen/fixture limit or accredited allocation is inferred, and this is not a vibration/shock load limit. |
Access and contact
Email testing@pektron.com or call the owner’s UK number +44 1332 832424 to discuss the contract-testing work and availability. The UK general email is info@pektron.co.uk, with central general/sales mailboxes published separately. Agree the specimen, fixture, exact methods and conditions, acceptance criteria, witnessing, required report and accreditation evidence, quotation and programme with Pektron.
Facility contact
- Address
- Alfreton Road
Derby, Derbyshire, DE21 4AP
United Kingdom - testing@pektron.com
- Telephone
- +44 1332 832424
- Website
- Official test house website
Standards and accreditation
- Owner-listed method references
- The owner table names BS EN 60068 climatic/dynamic families, automotive EMC references including CISPR 25, ISO 10605, ISO 11452 and ISO 7637, ingress BS EN 60529/BS ISO 20653, and electrical/chemical ISO 16750 parts. These are owner-listed references, with exact edition and applicability to confirm for the proposed work.
- Accreditation evidence to confirm
- The owner uses ISO/IEC 17025-calibre, alignment, independently assessed and accredited-assurance language. No current accredited site/method schedule was verified in the retained official pages. The Companies House organisation and registered-office record does not establish testing accreditation, recognised report status or certification outcome.
What to confirm with the facility
- Thermal-shock narrative and table ranges differ without a stated equipment link. No numerical temperature, ramp-rate, EMC, payload, frequency, acceleration or combined operating envelope is allocated. The push-pull measurement limit is separate from dynamic-test capacity.
- The published UK address identifies the owner’s Derby site. Exact laboratory configuration, method edition, required ingress code, operating conditions and report/accreditation status need confirmation. Owner ISO/IEC 17025 wording, corporate records and speed/cost claims do not establish an accredited method or guarantee availability and outcomes.
- Provide the product configuration, dimensions and mass, fixture needs, intended method and conditions, acceptance criteria, reporting requirements and programme so the provider can confirm suitability and cost.
Before requesting a test
Public information not available. Contact test facility provider for more information.
Frequently asked questions
Public information not available. Contact test facility provider for more information.
Related testing facilities
Public information not available. Contact test facility provider for more information.
Further reading
Public information not available. Contact test facility provider for more information.
Sources and review
Reviewed by Arc on 1 October 2026 in Europe/London using five fresh official sources. Owner Derby contract access, linked exact UK address, dedicated testing@pektron.com route, five selected test groups and unambiguous push-pull measurement up to 2.5 kN are mapped. The full facility narrative and HTML method table are preserved. Their thermal-shock ranges differ without an equipment link, so optional numerical operating envelopes are omitted. No owner IP-label normalisation or current accredited site/method status is inferred. Companies House corroborates organisation and registered office only. Original bodies, headers, retrieval metadata, titles, canonicals, WebPage dates and inspection records remain preserved. The corporate record has no verified page publication/modification date, and corporate filing dates and copyright are distinct from page/review dates. Prior discovery bodies, headers and metadata remain unchanged, with all four prior bodies byte-identical to their fresh captures. Imported postcode coordinates are cleared.
Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.
Pektron official testing and validation facility
The owner describes EMC, climatic/thermal-shock/HALT, vibration/shock/mechanical, ingress and electrical/chemical services, with push-pull force measurement up to 2.5 kN. Its narrative and method table state different thermal-shock ranges without linking equipment. All optional numerical operating envelopes are omitted from this guide. The full original table/narrative remains preserved. IP9K/IP69K owner labels are not normalised to an extra accredited code. ISO/IEC 17025-calibre, independent-assessment and standards wording is not a verified current site/method schedule. Original page publication is 19 December 2025 and modification 29 September 2026.
Pektron official contract-testing offer
The owner offers contract access to its Derby testing facility for prototype confidence, design verification, pre-compliance and formal validation. It publishes testing@pektron.com to ask about availability. ISO/IEC 17025 alignment and accredited-assurance language does not verify a current accredited method/site schedule or an outcome. Faster scheduling/cost claims are not guarantees. Original page publication is 14 May 2026 and modification 29 September 2026.
Pektron official UK-site contact
The linked UK contact page lists Alfreton Road, Derby, Derbyshire DE21 4AP and +44 1332 832424, with info@pektron.co.uk as the UK general email. The contract page supplies a separate testing mailbox. This UK-site address is not a verified room or universal all-site test allocation. Original page publication is 6 November 2025 and modification 12 August 2026.
Pektron official central contact page
The central page publishes +44 1332 832424 and general info@pektron.com/sales@pektron.com, while the UK page/footer uses info@pektron.co.uk. These remain distinct from testing@pektron.com and the separate US route. The page links the UK contact address. Original publication is 6 November 2025 and modification 30 September 2026.
Companies House Pektron Group Limited overview
The live record names PEKTRON GROUP LIMITED, company 00823259, with registered office Pektron, Alfreton Road, Derby DE21 4AP. Corporate status, incorporation, accounts and confirmation dates do not establish laboratory equipment, method accreditation or page publication. The original HTML has no canonical, date metadata, JSON-LD or visible time elements. No verified page publication or modification date was found.