Product Approvals Telford EMC and product testing laboratory
Product ApprovalsTelford, West Midlands
Product Approvals offers EMC and product testing from its Telford laboratory at Coalport House, Stafford Park 1. Owner services include emissions/immunity, safety and inspection, ingress protection, flammability, power and temperature/humidity work. The owner explicitly says it is not a UKAS accredited test lab. Its IP68 offer and equipment descriptions remain qualified owner statements. Agree the product, test method, conditions and required report with the provider.
Reviewed by Arc · About this review
Key facts
- Exact owner laboratory
- Suite C2, Coalport House, Stafford Court, Stafford Park 1, Telford TF3 3BD, United Kingdom. The testing page locates the laboratory in the West Midlands, and the contact page also uses Unit C2 for the same address.
- Explicit accreditation status
- The owner states that it is not a UKAS accredited test lab. Its ISO 17025 quality-management practices, ISO 9001 wording and relationships with accredited laboratories do not establish local accredited methods.
- Owner-offered testing
- Telford services include EMC emissions/immunity, safety and verification inspection, IP testing, glow-wire/needle-flame tests, power measurements and temperature/humidity endurance work. No current numerical chamber or EMC envelope is supplied.
- Current enquiry route
- Use +44 1588 620192, info@productapprovals.co.uk or the owner contact form. All five captured pages’ protected email attributes decode to this address. The imported test@productapprovals.co.uk route is not retained as current.
Testing capabilities
Owner-offered EMC emissions and immunity
The Telford owner list includes conducted/radiated emissions, harmonic current emissions, voltage fluctuations and flicker. Immunity includes ESD, radiated and conducted susceptibility, fast transient burst, surge, power-frequency magnetic field, and voltage dips/interruptions. The testing page describes pre-compliance and self-certification work in a semi-anechoic chamber. These are non-UKAS owner offers without numerical ranges.
Owner-offered product safety and verification inspection
The owner offers electrical/product safety and imported-product verification testing and inspection, including dielectric voltage withstand, fault and temperature-rise tests. UL preparation is pre-compliance work rather than formal approval. Exact product-standard edition and acceptance criteria need agreement because older standards and future-transition wording on the page are not treated as current requirements.
Owner-offered IP testing up to IP68
The owner states that it can carry out ingress-protection testing up to IP68 using IEC 60529. This is a non-UKAS offer without immersion depth/duration, water pressure, specimen size or current edition inferred. Agree the exact IP designation, operating state and test conditions before requesting work.
Owner-offered flammability, environmental and power testing
The testing page lists glow-wire and needle-flame flammability work, temperature-rise measurements using multichannel dataloggers, standby/electrical power measurements using a power analyser, and endurance testing in a programmable temperature/humidity chamber. No numerical chamber, power, specimen or flammability envelope is published in the retained evidence. These are non-UKAS owner offers.
Equipment and published limits
| Specification | Published value | Conditions |
|---|---|---|
| Owner laboratory equipment descriptions | Semi-anechoic chamber, multichannel dataloggers, power analyser and programmable temperature/humidity chamber | Qualitative owner testing-page descriptions. No named model, numerical frequency/field, temperature/humidity or power range, capacity, calibration status or accredited equipment scope inferred. |
Access and contact
Use info@productapprovals.co.uk, +44 1588 620192 or the owner contact form for testing enquiries. The protected email is verified from current original attributes. Agree the product/configuration, exact method and edition, specimen size, safety limits, IP conditions, required report and programme. If accredited data is needed, confirm any partner-laboratory arrangement and its exact location/method scope.
Facility contact
- Address
- Suite C2, Coalport House, Stafford Court, Stafford Park 1
Telford, West Midlands, TF3 3BD
United Kingdom - Telephone
- +44 1588 620192
- Website
- Official test house website
Standards and accreditation
- Explicit non-UKAS owner laboratory
- The owner explicitly says it is not a UKAS accredited test lab. ISO 17025 quality-management practices and ISO 9001 company wording do not change this status. Links with accredited test houses and outsourced project management do not transfer accreditation to the Telford laboratory.
- Method editions and qualified pre-compliance work
- The owner IP page names IEC 60529 without an edition. Product safety pages contain older BS EN 60950-1 / BS EN 60065 and future-transition wording, so they are not asserted as current certification requirements. Agree the applicable edition and acceptance criteria. UL preparation and EMC pre-compliance are distinct from formal certification or a guaranteed market approval.
What to confirm with the facility
- All retained testing is an owner offer from an explicitly non-UKAS laboratory. ISO quality practices, partner accreditation and certification-management services do not establish current local accredited methods or guarantee regulatory acceptance.
- The IP68 statement does not define depth, duration, water pressure, specimen size or edition. Qualitative EMC, chamber and power equipment descriptions do not provide numerical ranges. Confirm the product, exact method, conditions, report and any outsourced work with the owner.
- Provide the product/configuration, drawings, supply limits, intended standard and edition, target IP designation, specimens, reporting requirements and programme so the provider can confirm suitability and cost.
Before requesting a test
Public information not available. Contact test facility provider for more information.
Frequently asked questions
Public information not available. Contact test facility provider for more information.
Related testing facilities
Public information not available. Contact test facility provider for more information.
Further reading
Public information not available. Contact test facility provider for more information.
Sources and review
Reviewed by Arc on 1 October 2026 in Europe/London using five fresh official owner pages. Exact Telford laboratory address, four concise service groups, qualitative equipment and explicit not-UKAS statement are mapped. IP68 remains an owner offer without numerical conditions inferred. Older product-standard and future-transition wording does not establish current editions. Company ISO 9001, ISO 17025 quality practices, partner labs, UL preparation and market-approval advertising remain distinct from method accreditation. The current protected email attributes on all five pages decode to info@productapprovals.co.uk, replacing the imported test@ route. Exact original bodies, headers, titles, absent canonicals/page dates, attribute locators, body hashes and XOR derivation are retained. History and copyright are not review dates. All three prior discovery originals remain unchanged. Their raw bodies differ from the matching fresh bodies, while full visible text, publisher metadata and relevant decoded contact/capability links corroborate retained claims. Unrelated navigation links vary through session query parameters. Imported postcode coordinates are cleared.
Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.
Product Approvals official Telford EMC capabilities
The owner expressly links listed EMC emissions and immunity services to its Stafford Park, Telford headquarters. No numerical test range is retained. Investment in 2018 is company/facility history, and promised speed/market benefits are not guide commitments. Current protected email attributes decode to info@productapprovals.co.uk. Original title is EMC testing, without canonical, date meta, JSON-LD or visible publication dates.
Product Approvals official Telford testing services and accreditation statement
The owner offers local Telford product safety, EMC, IP, inspection and environmental/power testing and explicitly says it is not a UKAS accredited test lab. ISO 17025 quality-management practices and partner lab relationships do not transfer accreditation. Older BS EN 60950-1, BS EN 60065 and prospective EN 62368-1 language is preserved as source history, without current standards inferred. Equipment descriptions are qualitative. Lab setup in 2015 and copyright are not page dates. Current protected email attributes decode to info@productapprovals.co.uk. Original title is Testing - Product Approvals, without canonical or publication/modification metadata.
Product Approvals official company overview
The official overview corroborates Product Approvals and Telford address. General consultancy, compliance management, assembly and test, ISO 9001 and certification-management advertising are separate from local testing method accreditation. No throughput, payment, speed or certification guarantee is allocated. Company 2006 history and copyright 2017–2024 are not page dates. Original title is Product Approvals - Product Safety Certification Services, with no canonical or page-date metadata.
Product Approvals official contact route
The current official contact uses Unit C2 and the footer uses Suite C2 for Coalport House, Stafford Court, Stafford Park 1, Telford TF3 3BD, UK. Phone is +44 1588 620192. The exact protected email attributes decode to info@productapprovals.co.uk, replacing the imported test@ route. Original bodies remain unchanged and a hashed decoding record preserves all fifteen attributes and derivations. Business hours are not test-slot availability. Original title is Contact Us, without canonical or page-date metadata.
Product Approvals official IP testing offer
The owner offers IP testing up to IP68 using IEC 60529. This is owner wording without numerical immersion depth/duration, water pressure, specimen size, edition or accredited scope inferred. General IP examples and coding explanations are not extra local capabilities. Exact IP requirements and conditions need provider agreement. Original title is IP testing, without canonical or page-date metadata.