ROSEN Newcastle Vickers hardness testing laboratory
Rosen (UK)Newcastle-upon-Tyne
Rosen (UK)’s Brunswick testing facility in Newcastle is listed in current register 22813. The retrieved schedule covers Vickers hardness testing of metals, alloys and metal products at HV 5, HV 10 and HV 30, at the stated site only. The guide retains this exact local scope and the published schedule enquiry route.
Reviewed by Arc · About this review
Key facts
- Exact testing site
- Brunswick Industrial Estate, Brunswick Testing Facility Units 1, 2 & 9, Newcastle-upon-Tyne NE13 7BA. Schedule 22813 states testing at this address only.
- Retained local method
- Vickers hardness of metals, alloys and metal products at HV 5, HV 10 and HV 30. No wider local test portfolio is verified within this schedule.
- Published enquiry
- ghedley@rosen-group.com and +44 191 723 0250. George Hedley is the schedule-listed contact, without a verified present job title. The owner also publishes a general contact page.
Testing capabilities
Vickers hardness testing
The Brunswick schedule lists Vickers hardness for metals, alloys and metal products at the discrete HV 5, HV 10 and HV 30 scales, to BS EN ISO 6507-1:2023 and ASTM E92-23. Confirm the material, specimen preparation, scale and report.
Equipment and published limits
| Specification | Published value | Conditions |
|---|---|---|
| Scheduled Vickers scales | HV 5, HV 10 and HV 30 | Three discrete scales, not every setting between HV 5 and HV 30. No item dimensions, sample capacity or other hardness technique verified. |
Access and contact
Use ghedley@rosen-group.com or +44 191 723 0250 from the schedule to discuss Brunswick hardness testing. George Hedley is listed in the 26 November 2024 schedule, without a verified present role or response guarantee. The current owner general contact page is an additional enquiry route. Confirm the specimen, scale, preparation, report, delivery and current availability directly.
Facility contact
- Address
- Brunswick Industrial Estate, Brunswick Testing Facility Units 1, 2 & 9
Newcastle-upon-Tyne, NE13 7BA
United Kingdom - Telephone
- +44 191 723 0250
- Website
- Official test house website
Standards and accreditation
- UKAS 22813 and ISO/IEC 17025:2017
- The current exact register lists Rosen (UK) Testing Laboratories 22813 at the Brunswick site. Retrieved schedule issue 002 is dated 26 November 2024 and restricts testing to that address. Imported mirror status is not used as current evidence.
- Exact Vickers method references
- The sole listed method is Vickers hardness at HV 5, HV 10 and HV 30 to BS EN ISO 6507-1:2023 and ASTM E92-23. Other ROSEN inspection and technology services do not extend this local accredited schedule.
What to confirm with the facility
- Confirm the material, sample preparation, exact HV 5, HV 10 or HV 30 scale, acceptance criteria and required report. The schedule supplies no item-capacity figures or other local test methods.
- Confirm that the schedule-published contact remains appropriate and agree current availability and delivery details. The November 2024 schedule contact does not establish a present job title.
- Provide material grade, specimen dimensions, sample quantity, surface preparation, target method, reporting requirements and preferred programme dates.
Before requesting a test
Public information not available. Contact test facility provider for more information.
Frequently asked questions
Public information not available. Contact test facility provider for more information.
Related testing facilities
Public information not available. Contact test facility provider for more information.
Further reading
Public information not available. Contact test facility provider for more information.
Sources and review
Reviewed by Arc on 1 October 2026 in Europe/London using four fresh official captures. The exact current 22813 register block and sole complete schedule page verify the Brunswick site and discrete Vickers scope. The full PDF page was extracted, rendered and visually inspected. Issue 002 and original PDF creation/modification are dated 26 November 2024, separate from current retrieval and review. George Hedley’s email and phone remain schedule-published contacts without a present job-title or responsiveness claim. Imported Steve Parry and Ian Laing details, mirror status and coordinates are cleared. Wider global owner services are not transferred to this local scope. Original titles, canonical URLs, year-one placeholder metadata, body/header/retrieval records and provenance are retained. No valid owner publication/update date is inferred from those placeholders, news or company history. Both original prior responses are byte-identical to the current owner and schedule captures.
Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.
ROSEN – Empowered by technology
Exact owner seed redirects from HTTP to the canonical HTTPS English homepage. Global inspection and technology portfolio is operator context only. Original date metadata are year-one placeholders, with no valid page publication/update date. News and history dates do not date this guide.
Current global contact page invites questions and direct contact. It is a general owner enquiry route, without exact laboratory availability or booking guarantees. Original year-one dates are placeholders, not current publication/update dates. Related careers copy is excluded from composed guide.
Search UKAS accredited organisations
Exact Rosen (UK) Testing Laboratories 22813 block confirms Brunswick Testing Facility Units 1,2 and9, Newcastle-upon-Tyne NE13 7BA and telephone. Unrelated medical search matches excluded, protected email not decoded, imported mirror status not retained.
Issue 002 dated 26 November 2024, stated Brunswick site only. Sole complete page inspected. Metals/alloys/metal products Vickers Hv5,Hv10,Hv30 to exact ISO/ASTM references. George Hedley email/phone are schedule-published without a current-role or responsiveness guarantee. No wider global laboratory methods or imported personnel transfer.