Sheffield Metallurgical Services testing laboratory
Sheffield Metallurgical ServicesSheffield
Sheffield Metallurgical Services operates a materials testing laboratory at 11 Julian Road, Sheffield. Current UKAS schedule 27883 covers specified hardness, metallurgical and material-specific corrosion tests at that address only. The owner also advertises SEM/EDS analysis, which is separate from the methods in that schedule.
Reviewed by Arc · About this review
Key facts
- Exact laboratory site
- 11 Julian Road, Sheffield S9 1FZ. The current register and schedule identify this address, and the schedule limits testing to the above address only. The owner contact page writes the address as Unit 11 Julian Road.
- Current scheduled accreditation
- UKAS 27883, accredited to ISO/IEC 17025:2017. Schedule issue 004 is dated 22 September 2026 and specifies hardness, metallurgy and material-specific corrosion methods. It does not include SEM/EDS.
- Published enquiry
- The owner publishes +44 114 282 5271, met.enquiries@sheffieldmetallurgicalservices.co.uk and an enquiry form. The current schedule separately lists Jamie Woodward and jw@sheffieldmetallurgicalservices.co.uk. That is a schedule-listed contact, without an independently verified present role.
Testing capabilities
Scheduled hardness and case-depth tests
For metallic materials, the schedule lists low force and microhardness testing including case depth under BS EN ISO 6507-1:2023 and BS EN ISO 2639:2002, marked Withdrawn. Rockwell testing is limited to scale C, with BS EN ISO 6508:2023 exactly as printed and ASTM E18:2025. No load range or other Rockwell scale is inferred.
Scheduled grain size and inclusion assessment
Metallic-material grain size determination is listed under ASTM E112:2025. Inclusion content is listed under ASTM E45:2025 Method A. These exact rows do not establish additional methods or an equipment count.
Scheduled material-specific attack and corrosion tests
For stainless steels, the schedule lists intergranular attack under ASTM A262:2021 Practice A, pitting corrosion under ASTM G48:2025 and intergranular corrosion under ASTM A262:2021 Practice E. No method letter is printed for ASTM G48. For nickel alloys and chromium-bearing alloys, intergranular corrosion is listed under ASTM G28:2024 Method A.
Owner-advertised SEM/EDS analysis
The owner advertises scanning electron microscopy combined with energy dispersive X-ray spectroscopy, EDS or EDX, for microscopic surface or fracture-face imaging and elemental-composition information. The homepage identifies a Hitachi TM3000 with EDX, Secondary Electron and Backscattered detector. This advertised analysis is outside the checked current UKAS 27883 schedule.
Equipment and published limits
| Specification | Published value | Conditions |
|---|---|---|
| Advertised SEM/EDS apparatus | Hitachi TM3000 with EDX, Secondary Electron and Backscattered detector | Exact owner homepage statement for fractography imaging. No numerical magnification, sensitivity or specimen limits were verified, and SEM/EDS is not listed in the current UKAS 27883 schedule. |
Access and contact
Use the owner enquiry form, +44 114 282 5271 or met.enquiries@sheffieldmetallurgicalservices.co.uk to discuss work at the Sheffield laboratory. The schedule also lists Jamie Woodward and jw@sheffieldmetallurgicalservices.co.uk, without an independently verified present role. Agree the material, required method and version, accredited or advertised analysis, sample preparation, reporting and programme. No booking, response time or unrestricted site access is established by these contact routes.
Facility contact
- Address
- 11 Julian Road
Sheffield, S9 1FZ
United Kingdom - Telephone
- +44 114 282 5271
- Website
- Official test house website
Standards and accreditation
- UKAS 27883, ISO/IEC 17025:2017
- Current issue 004, dated 22 September 2026, limits scheduled testing to 11 Julian Road, Sheffield S9 1FZ. Accreditation applies to its specified methods and material allocations, without extending to all owner-advertised services.
- Hardness methods and restrictions
- BS EN ISO 6507-1:2023 and BS EN ISO 2639:2002, marked Withdrawn, for low force/microhardness including case depth. Rockwell C only uses BS EN ISO 6508:2023 exactly as printed and ASTM E18:2025. An additional ISO 6508 part or other scale is not inferred.
- Metallurgy and corrosion methods
- ASTM E112:2025, ASTM E45:2025 Method A, ASTM A262:2021 Practices A and E, ASTM G48:2025 without a printed method letter, and ASTM G28:2024 Method A. Each applies to the material and test stated in the schedule. SEM/EDS remains owner-advertised outside this scope.
What to confirm with the facility
- Confirm the exact material, method version and accreditation needed. Rockwell is scale C only, BS EN ISO 2639:2002 is marked Withdrawn, and no ASTM G48 method letter is printed. The corrosion rows have specific material allocations.
- Confirm the SEM/EDS work and required specimen or measurement limits with the provider. The advertised Hitachi TM3000 is separate from the current scheduled accreditation, and no numerical magnification, sensitivity or sample limits were verified.
- Provide sample material, dimensions, condition, quantities, preparation needs, requested methods, reporting requirements and preferred programme dates. Agree handling and access arrangements before delivery.
Before requesting a test
Public information not available. Contact test facility provider for more information.
Frequently asked questions
Public information not available. Contact test facility provider for more information.
Related testing facilities
Public information not available. Contact test facility provider for more information.
Further reading
Public information not available. Contact test facility provider for more information.
Sources and review
Reviewed by Arc on 1 October 2026 in Europe/London using five fresh official owner and UKAS captures. Register 27883 and schedule issue 004 dated 22 September 2026 identify 11 Julian Road, Sheffield S9 1FZ, with testing at that address only. The complete single PDF page was visually inspected, including its exact hardness scales, withdrawn label, metallurgy methods and material-specific corrosion rows. No ISO 6508 part or ASTM G48 method letter was added. SEM/EDS and Hitachi TM3000 remain owner-advertised outside the schedule. Current primary enquiry details come from the owner contact page, with Jamie Woodward/email qualified as schedule-listed without a present-role claim. Original PDF creation and modification timestamps are 24 September 2026. Owner homepage metadata shows publication 27 September 2021 and modification 7 August 2025, contact metadata 14 September 2021 and 7 August 2025, and SEM metadata 23 January 2021 and 23 August 2022. Register-template dates do not date the matching result. Original titles, canonicals, metadata, bodies, headers, extraction, complete-page image, font configuration, stderr and provenance are retained. Prior owner and schedule originals are raw-byte identical. The directory category denotes material testing without a separate structural-testing claim, and inherited postcode coordinates are cleared.
Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.
Sheffield Metallurgical Services | UKAS Accredited Materials Testing Laboratory
Owner identifies a materials testing and failure analysis laboratory, publishes the enquiry phone/email and advertises SEM/EDS with a Hitachi TM3000. Broad service and accreditation advertising is limited by the exact current UKAS schedule. SEM/EDS apparatus is owner-advertised, without scheduled accreditation or numerical limits inferred.
Search UKAS accredited organisations
Exact Sheffield Metallurgical Services testing result 27883 identifies 11 Julian Road, Sheffield S9 1FZ, the owner website and telephone. Other results and selector entries are not allocated to this laboratory. Protected email is not decoded.
Issue 004 dated 22 September 2026, one complete page visually inspected. Testing is at 11 Julian Road only. Exact hardness, metallurgy and material-specific corrosion methods are retained, including Rockwell C only and withdrawn BS EN ISO 2639:2002. ASTM G48:2025 prints no method letter. SEM/EDS is not in this schedule. Jamie Woodward and his email remain schedule-listed contacts without an independently verified present role.
CONTACT US | Sheffield Metallurgical Services
Owner publishes Unit 11 Julian Road, Sheffield S9 1FZ, 0114 282 5271, met.enquiries@sheffieldmetallurgicalservices.co.uk and an enquiry form. Plain published email is retained, without using its malformed hyperlink. No access, response-time or out-of-hours guarantee inferred.
SEM Analysis | Sheffield Metallurgical Services
Owner describes SEM with EDS/EDX for microscopic surface or fracture-face imaging and elemental-composition information. This is owner-advertised analysis outside the checked current UKAS27883 schedule, without inferred sensitivity, magnification or accreditation.