Stafford Aero Technologies Norwich EMC and LVD testing facility
Stafford Aero TechnologiesNorwich, Norfolk
Stafford Aero Technologies publishes a Norwich electrical product testing service and contact address. The owner explicitly says EMC testing is normally performed in its laboratory, with occasional site work for large or awkward systems. Three groups below retain its emissions, immunity and electrical safety descriptions. Current standards and accreditation are not verified, and the safety page contains historical regulatory wording.
Reviewed by Arc · About this review
Key facts
- Norwich identity and enquiry address
- 4 Chalk Hill House, 19 Rosary Road, Norwich, Norfolk NR1 1SZ, United Kingdom. The owner pages identify Stafford Aero Technologies and publish this postal contact address and emc@staffordaerotechnologies.co.uk.
- Owner-described laboratory and site work
- The owner says EMC testing is normally done in its laboratory, with occasional site testing for large or awkward systems. This does not establish a universal site service, chamber specification or accredited method scope.
- Product and programme discussion
- The owner describes discussing the product, design and operating environment before choosing applicable tests, with results and test descriptions supplied in a report. Present methods, programme and reporting require agreement.
Testing capabilities
Radiated and conducted emissions testing
The owner describes comparing a product’s radiated and conducted emissions with applicable EMC requirements, normally in its laboratory. No frequency band, chamber, apparatus inventory or accredited standard edition is verified in the checked pages. Agree the product configuration and exact method.
EMC immunity testing
The owner says it exposes products to relevant immunity standards and checks their response. This remains an owner-described service without a verified current standard edition, field strength, transient range or apparatus capacity. Laboratory and occasional site arrangements need confirmation.
Electrical safety inspection and testing
The owner describes inspecting and testing electrical products for low-voltage safety and supplying a report, usually alongside EMC work. Its LVD page contains future-tense wording about 20 April 2016. That historical guidance does not establish current compliance rules or accreditation, and its illustrative bonding test is not a facility operating-limit claim.
Equipment and published limits
Public information not available. Contact test facility provider for more information.
Access and contact
Use emc@staffordaerotechnologies.co.uk or the published Norwich postal address to discuss the product and intended operating environment. The owner describes programme discussion, laboratory testing, occasional site work for large systems, test reports and discussion of modifications or retests. Confirm the current method, sample and setup, location, preparation, report and dates. No current telephone or named contact was verified in the checked sources.
Facility contact
- Address
- 4 Chalk Hill House, 19 Rosary Road
Norwich, Norfolk, NR1 1SZ
United Kingdom - Website
- Official test house website
Standards and accreditation
Public information not available. Contact test facility provider for more information.
What to confirm with the facility
- The LVD page retains future-tense wording that Directive 2014/35/EU will come into force on 20 April 2016. Treat that as source history and confirm current applicable requirements with the provider. It is not verified current regulatory advice or method accreditation.
- Confirm exact emissions, immunity and safety methods, product configuration and laboratory or occasional site arrangements. The owner’s service descriptions and examples do not establish current numerical limits, equipment inventory or universal site capability.
- Agree preparation, reporting, modification or retest requirements and dates. Owner documentation and scheduling descriptions do not guarantee a current booking or compliance outcome.
- Provide the product, intended market and operating environment, sample condition and dimensions, power and operating modes, required procedure, acceptance criteria, report requirements and dates. Agree preparation, delivery, test location, programme and costs with the provider.
Before requesting a test
Public information not available. Contact test facility provider for more information.
Frequently asked questions
Public information not available. Contact test facility provider for more information.
Related testing facilities
Public information not available. Contact test facility provider for more information.
Further reading
Public information not available. Contact test facility provider for more information.
Sources and review
Reviewed by Arc on 1 October 2026 in Europe/London using four fresh official owner captures. They identify Stafford Aero Technologies and the Norwich contact address at 4 Chalk Hill House, 19 Rosary Road, NR1 1SZ. The EMC solution page explicitly describes its own laboratory and occasional site work for large or awkward systems. Three owner-described groups cover radiated and conducted emissions, immunity and electrical safety inspection and testing. No current accreditation, exact standard editions, apparatus inventory or numerical operating limits are verified. The LVD page’s future-tense April 2016 regulatory wording is preserved as source history, without current compliance advice or transferring its numerical example as capacity. Current email and postal routes are supported. Imported telephone and numerical coordinates are cleared. Original bodies, headers, titles, absent canonicals, date metadata, JSON-LD and time elements are retained. Actual review and retrieval dates are separate from source history, experience and copyright statements.
Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.
CE marking and EMC testing of electronic and electrical products
Owner gives the exact Norwich contact address, legal footer identity and electrical product testing overview. Historical experience claims and broad consultancy descriptions do not establish accreditation or equipment.
CE mark and testing solution - Stafford Aero Technologies
Owner explicitly describes testing normally at its laboratory, with occasional site work for large or awkward systems. Radiated and conducted emissions and immunity are owner-described services. Reporting and retest descriptions are not present booking or compliance guarantees.
LVD low voltage directive compliance information by Stafford Aero Technologies
Owner describes inspecting and testing products and providing a safety report. The page says Directive 2014/35/EU will come into force on 20 April 2016. This historical wording is not current regulatory advice or method accreditation. Its numerical bonding example is not equipment capacity.
Contact CE mark EMC UK testing specialists Stafford Aero Technologies
Contact page provides emc@staffordaerotechnologies.co.uk and the exact Norwich postal address. No current telephone or named contact is verified here.