Skip to content
Arc

Stanger Testing Services Cambuslang materials laboratory

Stanger Testing ServicesCambuslang, Glasgow

Stanger Testing Services operates the Cambuslang materials laboratory at Bogleshole Road, Glasgow G72 7DD. Current UKAS 0251 issue 062 identifies this laboratory as code A. Five selected groups below cover local physical testing of aggregates, bituminous mixtures, concrete, soils, rock and structural fixings. Other laboratories and site activities have separate codes, and the stated flexible scope applies only to marked activities.

Reviewed by Arc · About this review

Key facts

Exact Cambuslang laboratory
Cambuslang Laboratory, Bogleshole Road, Cambuslang, Glasgow G72 7DD, United Kingdom. The current UKAS register and schedule identify Stanger Testing Services and assign construction materials laboratory testing at this address to code A.
Current exact accreditation and location allocation
Testing Laboratories 0251, ISO/IEC 17025:2017, issue 062 dated 28 November 2025. B and C identify other laboratories, while X identifies site activities away from the listed laboratories. TPM43 flexibility enables site laboratories only for activities marked Flexi.
Published customer enquiry route
The owner publishes +44 141 641 3623 and enquiries@stangertesting.co.uk for its principal Glasgow office at Bogleshole Road. UKAS corroborates this telephone and schedule email. The owner offers construction materials testing in laboratories or on client sites and invites quote enquiries. Exact location and method need agreement.

Testing capabilities

Aggregate physical properties and durability

Selected A rows cover frost heave under BS 812-124:2009, sieve grading under BS EN 933-1:2012, flakiness under BS EN 933-3:2012, Los Angeles fragmentation under BS EN 1097-2:2020, Micro-Deval wear under BS EN 1097-1:2023, abrasion and polished stone value under BS EN 1097-8:2020, soundness under BS EN 1367-2:2009 and drying shrinkage under BS EN 1367-4:2008. Sample restrictions and Flexi markings remain specific to each row. Site sampling and separate chemical analyses are distinct.

Bituminous mixture physical testing

A rows cover grading under BS EN 12697-2:2024, maximum density under BS EN 12697-5:2018, separate bulk-density techniques under BS EN 12697-6:2020, air voids under BS EN 12697-8:2018, specimen dimensions under BS EN 12697-29:2020 and vibratory compaction under BS EN 12697-32:2019. Wheel tracking is Procedure B in air under the listed 2020+A1:2023 and 2003 editions. Stiffness is the IT-CY method under BS EN 12697-26:2004 Annex C. These rows do not establish an apparatus count or operating envelope. Site sampling and temperature measurements remain X work.

Concrete specimen preparation and physical testing

A-supported rows cover making and curing cubic specimens under BS EN 12390-2:2019, cube compressive strength under BS EN 12390-3:2019, shape and dimensions under BS EN 12390-1:2021 and density under BS EN 12390-7:2019. The core-taking, examination and compression row under BS EN 12504-1:2019 carries A and X, so agree the laboratory versus site parts. Fresh-concrete site sampling, slump, air content and reinforcement location are separate X rows. Chemical analysis is not combined with this selected physical group.

Laboratory soil properties and strength

A laboratory rows include water content under BS EN ISO 17892-1:2014+A1:2022, particle density under BS EN ISO 17892-3:2015, sieve grading under BS EN ISO 17892-4:2016, unconsolidated undrained triaxial testing under BS EN ISO 17892-8:2018 and liquid and plastic limits under BS EN ISO 17892-12:2018+A2:2022. Further A rows use BS 1377-2:2022 for consistency, density, grading, compaction relationships, moisture condition value, laboratory CBR and undrained strength. In-situ density, CBR, plate loading and dynamic cone penetration are separate X work.

Rock properties and structural-fixing bond strength

A rock rows cover water absorption under BS EN 13383-2:2019 and uniaxial compressive strength under BS EN 1926:2006. A structural-fixing work is measurement of bond strength by pull-off under BS EN 1542:1999. These are distinct material and test rows. They do not establish a general accreditation for all building-defect investigations or structural load tests advertised by the owner.

Equipment and published limits

Public information not available. Contact test facility provider for more information.

Access and contact

Use the corroborated principal-office route, +44 141 641 3623 or enquiries@stangertesting.co.uk, and the owner enquiry form. Agree the material, exact method and edition, A laboratory versus X site work, sample preparation, reporting and dates. The contact introduction also lists enquiries@stangertestingservices.co.uk, which differs from its principal-office address and the current schedule. Mr L Murphy is listed in issue 062 dated 28 November 2025, without independently verified present-role status. Dundee office contacts remain separate.

Facility contact

Address
Bogleshole Road
Cambuslang, Glasgow, G72 7DD
United Kingdom

Standards and accreditation

UKAS 0251 exact Cambuslang A scope
Current Testing Laboratories 0251, ISO/IEC 17025:2017, issue 062 dated 28 November 2025 assigns A to Cambuslang. B and C are other laboratories and X is site work away from them. TPM43 flexibility enables site laboratories only for activities marked Flexi. General owner UKAS advertising does not expand the exact row or location scope.
Aggregate and bituminous method restrictions
Retain each stated aggregate or bituminous edition, material restriction and location code. Wheel tracking is Procedure B in air under BS EN 12697-22:2020+A1:2023 and BS EN 12697-22:2003. The IT-CY stiffness row is BS EN 12697-26:2004 Annex C. Separate density techniques, preparation, sampling and chemical procedures are not a combined test or capacity claim.
Concrete, soils, rock and structural fixings
Selected concrete rows retain the stated BS EN 12390 and BS EN 12504-1 editions. Laboratory soil rows retain the stated BS EN ISO 17892 editions and BS 1377-2:2022. Rock absorption and uniaxial compression are BS EN 13383-2:2019 and BS EN 1926:2006. Structural-fixing bond strength is BS EN 1542:1999. Site-only measurements and other-premises allocations remain separate.

What to confirm with the facility

  • Confirm the exact material, method, edition and location code. Only A-supported physical rows are described here. B and C are other laboratories, X is separate site work, and TPM43 flexibility applies only to Flexi-marked activities.
  • Agree preparation, laboratory or site parts, reporting and dates. Separate physical, chemical and road or building-investigation activities should not be treated as a single accredited service. Method rows do not establish equipment counts, operating limits or current booking availability.
  • Use the corroborated principal-office enquiry route and resolve the alternative introductory email with the provider. Mr L Murphy remains a contact from the November 2025 issue, with no independently verified present-role claim.
  • Provide the project, material and sample condition, dimensions and preparation, required procedure or standard, acceptance criteria, reporting requirements and dates. Agree sample quantity, delivery, laboratory or site work, programme and costs with the provider.

Before requesting a test

Public information not available. Contact test facility provider for more information.

Frequently asked questions

Public information not available. Contact test facility provider for more information.

Public information not available. Contact test facility provider for more information.

Further reading

Public information not available. Contact test facility provider for more information.

Sources and review

Reviewed by Arc on 1 October 2026 in Europe/London using four fresh official owner and UKAS captures. Current Testing Laboratories 0251 and all eight fully inspected pages of issue 062 dated 28 November 2025 identify A as Cambuslang Laboratory at Bogleshole Road, Glasgow G72 7DD. Five selected physical groups cover aggregates, bituminous mixtures, concrete specimens, laboratory soils, and rock or structural-fixing bond tests. B and C remain other laboratories and X remains site work away from them. TPM43 flexibility is confined to Flexi-marked activities. Exact editions, A-supported rows and Procedure B in-air wheel tracking are preserved. Separate chemistry, site sampling and measurements, road investigations and wider building-defect services are not transferred into these groups. No apparatus inventory or numerical operating limits were verified. The principal-office phone and email are corroborated by UKAS, while the contact introduction’s alternative email is qualified. Mr L Murphy remains a dated November 2025 schedule contact. A legacy stangers.net materials route failed certificate verification. That preserved access failure does not prove information is unpublished. Original bodies, headers, titles, canonicals, HTML metadata and absent owner dates, UKAS template and unrelated resource dates, visible issue date, later PDF timestamps, all eight images and extraction and rendering provenance are retained. Actual review and retrieval are separate from original dates. Complete directory overrides clear inherited coordinates.

Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.

  1. Stanger Testing Services | Building Defect Investigation UK | Construction Materials Testing Scotland | Asphalt Testing Scotland

    Stanger Testing Services · Reviewed

    Owner describes construction materials testing in its laboratories and on client sites, Glasgow and Dundee offices, and the general enquiry route. Broad defect investigation, road investigation and chemistry advertising does not allocate every service to Cambuslang or extend its exact accreditation.

  2. Contact | Stanger Testing Services | Building Defect Investigation UK | Construction Materials Testing Scotland | Asphalt Testing Scotland

    Stanger Testing Services · Reviewed

    Principal Office, Glasgow lists Bogleshole Road, G72 7DD, +44 141 6413623 and enquiries@stangertesting.co.uk, corroborated by the current UKAS schedule and register. The introductory text also lists enquiries@stangertestingservices.co.uk. Dundee contacts remain separate.

  3. Search UKAS accredited organisations

    United Kingdom Accreditation Service · Reviewed

    Exact Stanger Testing Services Testing Laboratories 0251 result gives Cambuslang Laboratory, Bogleshole Road, Glasgow G72 7DD and the corroborated telephone. Register email is protected and is not decoded or inferred. Template dates and linked resource dates are distinct from the organisation entry.

  4. UKAS schedule 0251, Stanger Testing Services, issue 062

    United Kingdom Accreditation Service · Reviewed

    Issue 062 dated 28 November 2025 assigns code A to Cambuslang Laboratory at Bogleshole Road. B and C are other laboratories, and X denotes site work away from them. TPM43 flexibility permits site laboratories only for Flexi-marked activities. All eight complete pages were visually inspected. Five selected physical groups retain A rows, restrictions and editions. Mr L Murphy is a dated issue contact.